Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > Running gear
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 19th August 2019, 02:23 PM
bentovey bentovey is offline
Member
 
Join Date: Aug 2018
Posts: 56
Default MX5 handbrake

Hi guys, lm using mx5 rear brakes and having trouble routing the handbrake cables to avoid rubbing the chassis.
I’ve tried bending the cable bracket to no avail.
I’ve tried cutting and re-drilling, still no joy.
Has anybody tried swapping the cable over so the cable comes out the rear of the calliper?
Essentially chopping off the nipple guide on the lever and attaching a cable mount then making a plate with a nipple guide on it that bolts back on to the calliper.
__________________
Statistically only one in seven dwarves are happy
Reply With Quote
  #2  
Old 19th August 2019, 07:04 PM
bentovey bentovey is offline
Member
 
Join Date: Aug 2018
Posts: 56
Default

http://forums.haynes.co.uk/attachmen...d=156623417 5
Attached Images
File Type: jpg C892A22F-5CB1-41AA-857F-428942A796F9.jpg (8.0 KB, 26 views)
__________________
Statistically only one in seven dwarves are happy
Reply With Quote
  #3  
Old 19th August 2019, 07:05 PM
bentovey bentovey is offline
Member
 
Join Date: Aug 2018
Posts: 56
Default

Sorry for the terrible photo
__________________
Statistically only one in seven dwarves are happy
Reply With Quote
  #4  
Old 19th August 2019, 08:22 PM
garyout garyout is offline
Senior Member
 
Join Date: Feb 2016
Location: Gosport Hampshire
Posts: 154
Default

Evening

I basically made two new mounts for the callipers a little longer and different angle I then crossed over the cable routing as it goes over the diff so n/s cable goes to the o/s yoke then that goes to single cable to handbrake.



Hope that makes sense.

buzz me your email and ill send you some pics if it helps


Gary
Reply With Quote
  #5  
Old 19th August 2019, 09:57 PM
bentovey bentovey is offline
Member
 
Join Date: Aug 2018
Posts: 56
Default

Hi Gary, I’m using my version of the talon diff housing so there isn’t much room for cable routing. I might cut two scoops out of the top diff support and weld in a couple of 20mm diameter tubes for the cables to pass through
http://forums.haynes.co.uk/attachment.php?
attachment=1922&stc=1&d=1566244572
Attached Images
File Type: jpg 249EB234-836C-46E0-874E-42B2543055FD.jpg (15.2 KB, 16 views)
__________________
Statistically only one in seven dwarves are happy
Reply With Quote
  #6  
Old 19th August 2019, 10:26 PM
garyout garyout is offline
Senior Member
 
Join Date: Feb 2016
Location: Gosport Hampshire
Posts: 154
Default

I stand corrected mine don't swap over they did do!!!

So mine is also a Talon chassis, I have also made some brackets that bolt up with the wishbones and also run it through two large cable clips that are bolted to the inch x inch box section across the top of the diff, although I haven't had it rolling their is plenty of adjustment and cant turn hub with a lever bar.


Gary
Reply With Quote
  #7  
Old 19th August 2019, 10:59 PM
bentovey bentovey is offline
Member
 
Join Date: Aug 2018
Posts: 56
Default

Are you using Talons diff housing?
I’ve made my own but it means I can’t run the handbrake cables easily past the diff
__________________
Statistically only one in seven dwarves are happy
Reply With Quote
  #8  
Old 20th August 2019, 06:20 PM
garyout garyout is offline
Senior Member
 
Join Date: Feb 2016
Location: Gosport Hampshire
Posts: 154
Default

Yea I have one of Talons diff covers its not really that time coming over the top of it

Gary
Reply With Quote
  #9  
Old 20th August 2019, 06:45 PM
bentovey bentovey is offline
Member
 
Join Date: Aug 2018
Posts: 56
Default

Do you have a photo of how you’ve ran the cables over the diff?
My handbrake is positioned so it misses the gear lever when in reverse and that means it’s quite far back, which in turn means the handbrake cables are quite far back. Did you shorten your single handbrake cable?
__________________
Statistically only one in seven dwarves are happy
Reply With Quote
  #10  
Old 20th August 2019, 07:15 PM
garyout garyout is offline
Senior Member
 
Join Date: Feb 2016
Location: Gosport Hampshire
Posts: 154
Default

Buzz me over email or mobile and ill send some pics I can only seem to login to site on laptop also using single cable to handbrake

Gary
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 06:47 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.