|
|
#1
23rd July 2015, 07:31 AM
|
|||
|
|||
Engine mount dimensions.
Hi, I was wondering if any one has position dimensions for the standard fabricated engine mounts and pinto engine as per the original as stated by Chris Gibbs. Searched can't find anything sorry if this detail has been given before.
Thanks Daveyb. 
|
|
#2
23rd July 2015, 08:39 AM
|
|||
|
|||
|
Cant give pinto measurements as I use a zetec, however the below link may help if you can get the engine mocked in place and weld in situ.
http://www.haynes.co.uk/forums/showt...t=Pinto+mounts
__________________
Total Spent so far - £xxxxx Last Purchase - Engine mounts, steering wheel, slave cylinder.
|
|
#3
23rd July 2015, 10:40 AM
|
|||
|
|||
|
Forget the book mounts and make your own,it will save you hard work and look better.
Weld two 5mm plates to chassis and two pieces of tube for legs and two bits of 3mm to engine.
__________________
Cost : Little as possible. Thanks : To those who by their generosity my build has progressed. Its a handmade sports car not a flaming kit car !!! If at first you dont succeed,avoid skydiving... No parachute require to freefall,only if you want to do it twice.
|
|
#4
23rd July 2015, 03:37 PM
|
||||
|
||||
|
I'd go for 5mm plates on the engine rather than 3mm.
|
|
#5
24th July 2015, 12:19 PM
|
|||
|
|||
|
Agreed, after I had posted it I thought better of it given previous issue's.
__________________
Cost : Little as possible. Thanks : To those who by their generosity my build has progressed. Its a handmade sports car not a flaming kit car !!! If at first you dont succeed,avoid skydiving... No parachute require to freefall,only if you want to do it twice.
|
|
#6
24th July 2015, 09:38 PM
|
|||
|
|||
|
Hi Daveyb - when I bought my part finished car it had a Pinto engine fitted, I have removed it and replaced it with a MX5 unit but still have the original engine mounts. You are welcome to them (plus post costs). PM your email and I'll send pics
__________________
My build blog here http://ianhaynes20.wordpress.com
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
