|
|
#1
7th August 2015, 10:30 AM
|
|||
|
|||
Help forwarding a reamer to Estonia?
Managed to find the taper reamer for Sierra uprights from one Irish webshop, but they do not ship to Estonia.
So could some fellow builder give me a hand by receiving it at UK/Ireland address and then forward it to me? Of course I will cover all the costs plus some extra for the trouble. Regards, Madis 
|
|
#2
7th August 2015, 11:09 AM
|
||||
|
||||
|
I sent something to estonia a few weeks ago cost a bloody fortune for a small 1kg parcel cost me £24 and that was the best price I could find but if you need to I will take it in and forward it to you
|
|
#3
7th August 2015, 11:53 AM
|
||||
|
||||
|
Hi Madis,
If you find a Swedish webshop that sell the same parts, I can buy it for you and send it to Estonia, it might be cheaper than from the UK. Or if you give me the specs of the reamer, I can try to fond it here. Do not hesitate if you want me to do so. Good luck!
__________________
Sylvain Pictures of my completed Roadster https://www.flickr.com/photos/994983...7646799525542/ Build blog: http://vouchtroadster.blogspot.se/ https://cafrazx550.blogspot.com/
|
|
#4
7th August 2015, 03:05 PM
|
|||
|
|||
|
Have you tried Axminster direct,shipping is a fortune.
__________________
Cost : Little as possible. Thanks : To those who by their generosity my build has progressed. Its a handmade sports car not a flaming kit car !!! If at first you dont succeed,avoid skydiving... No parachute require to freefall,only if you want to do it twice.
|
|
#5
7th August 2015, 05:42 PM
|
||||
|
||||
|
Quote:
|
|
#6
10th August 2015, 08:57 AM
|
|||
|
|||
|
Typical
__________________
Cost : Little as possible. Thanks : To those who by their generosity my build has progressed. Its a handmade sports car not a flaming kit car !!! If at first you dont succeed,avoid skydiving... No parachute require to freefall,only if you want to do it twice.
|
|
#8
11th August 2015, 12:05 PM
|
|||
|
|||
|
Thank you all for the feedback.
At the mean time I had a read on the super7thheaven blog and he suggested to use a 1-1/2" per foot (7.15 deg) reamer from States. SteveH1 I will PM you when I will go the Axminister route from Joe McKenna's, thanks again for giving a hand.
|
|
#9
12th August 2015, 10:51 PM
|
||||
|
||||
|
What about the Axminster one you borrowed from me 3 or 4 years ago? Unsatisfied with the taper, or another set of uprights to ream? I could send you mine again (but it's lent to someone else now, too).
__________________
Albert Haynes Roadster FAQ | Haynes Builder Locations Gallery, build thread in Lithuanian / via Google Translate.
|
|
#10
12th August 2015, 10:58 PM
|
||||
|
||||
|
Also, I bought a lot of stuff from "UK only" senders via a parcel forwarding service. You get the stuff sent to their address in Barking, Essex, they bring it over with a van once or twice a week, and you get it delivered by DPD, all in ~5 days for 8€ for a small package. You could look for a similar service based in Estonia...
__________________
Albert Haynes Roadster FAQ | Haynes Builder Locations Gallery, build thread in Lithuanian / via Google Translate.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
