Car wiring

[Stot]

Its the headlight dip/dim resistor. I think it was used to dim the headlights so as to act like side lights as the MX5 didnt have side lights as such.



I kept mine for some reason. I must try unplugging/bridging it and see if my lights still work because I sure do have side lights. I cant find it on any of my wiring diagrams at work.

edit:

UK specification cars have a dim-dip function. This raises the headlights and illuminates them at about 16% of normal illumination whenever the sidelights are turned on and the ignition is on.

So in the UK our side light must have to be part of the main headlight unit, the side lights that are part of the indicators didnt suffice so the headlights turned on at low power to simulate it.

Cheers
Stot

[Numplumb]

Hi Stot thanks for that info, where does it connect,did you have a relay for headlights and a TNS relay?
I don't have have either of these but I have a relay which is for dim dip HD22
But the wire colour code doesn't match any of the diagrams I have, also the wires for dipped headlights seem very small compared to the main beam ones

Regards Mick.

[Stot]

Its the white connector near the HD22 and LM10 I think is the other relay there and also the wiper stuff.

I unplugged mine and it makes no difference because I removed the dip dim relay so I'm going to whip it out.

Cheers
Stot

[CTWV50]

Here you go, remove that lot!

[Numplumb]

Thanks for the wiring diagram have worked it out now it was the dim/dip relay and no headlight and tns relay that was confusing me