|
|
|
|
#1
18th November 2011, 05:42 PM
|
||||
|
||||
Sorry Andy i've just seen this - don't get on the forum much now. Yes the threaded bushes are 60mm long and 10no if you count the front uppers to.
AndyH
__________________
Haynes Roadster / Saturn GRP Bodywork. Now available direct through http://www.gillhamonline.co.uk/ or contact me direct on andrew.hugill@ntlworld.com Regards..........AndyH 
|
|
#2
18th November 2011, 05:48 PM
|
|||
|
|||
|
Typical I get a reply when I haven't got my guide again!
Thanks for the reply. Am I correct in thinking that the lower wishbone adjusters are 25mm or are they 30 as well? I nearly cut all my 30mm steel then had a panic so refrained! Thanks again Andy
__________________
http://bamaroadster.blogspot.com/
|
|
#3
18th November 2011, 06:15 PM
|
||||
|
||||
|
They are all 30mm rod with M16 threaded
__________________
Haynes Roadster / Saturn GRP Bodywork. Now available direct through http://www.gillhamonline.co.uk/ or contact me direct on andrew.hugill@ntlworld.com Regards..........AndyH
|
|
#4
18th November 2011, 06:18 PM
|
|||
|
|||
|
That's good news seeing as I have no 25 mm.
Thanks again Andy
__________________
http://bamaroadster.blogspot.com/
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
