#1
|
|||
|
|||
Pinto Engine Loom
Hi Guy's
Have just started fitting my wiring. But i have a few problems. One of my problem is. My sierra donor was originally fitted with 1.8 cvh, at some point it had a 2l pinto fitted. The cvh engine loom was hacked about to fit the pinto, i was wondering if anyone had a proper pinto engine loom they didn't need in exchange for beer tokens. The next problem is i've lost all my pictures i took while disconnecting the electric from my donor , so remembering what went where is going to be a bit tricky . So i will be posting up some pictures and asking what is meant to be attached to this and that. A big thanks in advance for any help that i my get. Terry
__________________
If you need a friend, call me, if u need company call me, if you need help call me, if u need money this number is no longer available. |
#2
|
|||
|
|||
Most pintos where wired up quiet basic so should not be to hard to get it all sorted
Did you not go for a new loom come the end? |
#3
|
|||
|
|||
Hi Baz,
no didn't get one, but the way things are looking i my have to go that way. the loom i've got, was from injection engine and it was hacked about quite badly. Terry
__________________
If you need a friend, call me, if u need company call me, if you need help call me, if u need money this number is no longer available. |
#4
|
||||
|
||||
What have you actualy got?
A sierra 2.0 Pinot (carb) model should be runnign an ESC-2 spark control, the 1.8 CVH will have had a ESC-Hybrid. Or is this a PRE-Sierra 2.0 running Points? TT
__________________
You only get a woosh with a dump valve Build Thread Man Cave Mantiques Cecil Street Auto Repairs Garage Carlisle Build Cost £4181.65 - Last - Wheel Cylinders |
#5
|
|||
|
|||
I'm running a, 2L Pinto with weber twin 40's with a electronic dizzy.
Terry
__________________
If you need a friend, call me, if u need company call me, if you need help call me, if u need money this number is no longer available. Last edited by tkpm : 18th June 2012 at 06:05 PM. |
#6
|
||||
|
||||
Who's dizzy? The ford one or an aftermarket one?
__________________
You only get a woosh with a dump valve Build Thread Man Cave Mantiques Cecil Street Auto Repairs Garage Carlisle Build Cost £4181.65 - Last - Wheel Cylinders |
#7
|
|||
|
|||
It's the ford one, will post up some pic's later tt.
__________________
If you need a friend, call me, if u need company call me, if you need help call me, if u need money this number is no longer available. |
#8
|
||||
|
||||
You will need the ESC-2 module to go with it then, as well as the loom.
TT
__________________
You only get a woosh with a dump valve Build Thread Man Cave Mantiques Cecil Street Auto Repairs Garage Carlisle Build Cost £4181.65 - Last - Wheel Cylinders |
#9
|
|||
|
|||
sorry about the delay in pic's,
is this ESC-2 you was on about TT, P6200069.JPG carbs P6200072.JPG dizzy P6200077.JPG coil P6200078.JPG coil wires, does it matter which way round they go on the coil. P6200073.JPG
__________________
If you need a friend, call me, if u need company call me, if you need help call me, if u need money this number is no longer available. |
#10
|
||||
|
||||
Ahh, my mistake it runs basic TFI not ESC ( my poor memory ).
But yes that module is your ignition amp. TT
__________________
You only get a woosh with a dump valve Build Thread Man Cave Mantiques Cecil Street Auto Repairs Garage Carlisle Build Cost £4181.65 - Last - Wheel Cylinders |
Thread Tools | |
Display Modes | |
|
|