#1
|
|||
|
|||
Driveshart length
Anybody found problems with rear bolt on shafts,basically I have tried to fit the ones I have to the rear suspension and they arev to short.
__________________
Cost : Little as possible. Thanks : To those who by their generosity my build has progressed. Its a handmade sports car not a flaming kit car !!! If at first you dont succeed,avoid skydiving... No parachute require to freefall,only if you want to do it twice. |
#2
|
||||
|
||||
The Sierra drive shafts fit perfectly, after all the car is built around the running gear off the Sierra. Are both too short? I know they are different lengths for each side.
|
#3
|
||||
|
||||
they are sided try the one that doesnt fit on the other side.
__________________
My Roadster Is Finished NerNer....... Pigs can fly, you just have to carry them onto the plane. My Pictures http://s707.photobucket.com/user/ashgardiner/profile/ |
#4
|
|||
|
|||
Panic over and thanks for the replys,aware they are sided as there is about 40 +mm difference in the shafts. Did not count on the fact that Ginetta use short custom made rear drive shafts and that is what I am using for donor as it has a brand new engine,Quaife box and new Quaife LSD,before anybody asks why,the Roadster handles 100% better.
Apolagies for the spelling mistakes.
__________________
Cost : Little as possible. Thanks : To those who by their generosity my build has progressed. Its a handmade sports car not a flaming kit car !!! If at first you dont succeed,avoid skydiving... No parachute require to freefall,only if you want to do it twice. |
Thread Tools | |
Display Modes | |
|
|