Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > SVA/Legal
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 9th February 2016, 09:51 AM
TheArf TheArf is offline
Senior Member
 
Join Date: Jan 2010
Location: Wrexham North Wales
Posts: 1,041
Default Rear number plate

Good morning guys, a quick question for those that have been through the SVA, is there a set hight for the rear number plate. I have down loaded the manual and I think I'm suffering from legal jargon blindness, I have also down loaded the illustration from Westfield that gives all of the dimensions for the lights, minimum and maximum distances/heights etc.

Any help on this would be appreciated

Arfon
Reply With Quote
  #2  
Old 9th February 2016, 10:17 AM
flyerncle flyerncle is offline
Senior Member
 
Join Date: Mar 2008
Location: gateshead,near cobbly bit of A1 North
Posts: 3,188
Default

(2) Subject to paragraph (3), a registration plate shall be fixed vertically or, where that is not reasonably practicable, in a position as close to the vertical as is reasonably practical at the front and rear of every motor vehicle in such manner that the characters of the registration mark shall, at all
times, be visible from the front or the rear of the motor vehicle..

I think there was an exemption for the front one as there is not much to attach it too, and there does not seem to be a height stated apart from it must not be above a certain height.
__________________
Cost : Little as possible.
Thanks : To those who by their generosity my build has progressed.
Its a handmade sports car not a flaming kit car !!!


If at first you dont succeed,avoid skydiving...

No parachute require to freefall,only if you want to do it twice.
Reply With Quote
  #3  
Old 9th February 2016, 10:53 AM
TheArf TheArf is offline
Senior Member
 
Join Date: Jan 2010
Location: Wrexham North Wales
Posts: 1,041
Default

I found that, I just wanted to check up on the max/min height if there was one.
Knowing my luck if I just located one it would be in the wrong place.

Arfon
Reply With Quote
  #4  
Old 10th February 2016, 10:40 AM
flyerncle flyerncle is offline
Senior Member
 
Join Date: Mar 2008
Location: gateshead,near cobbly bit of A1 North
Posts: 3,188
Default

Don't know why I bother.......
__________________
Cost : Little as possible.
Thanks : To those who by their generosity my build has progressed.
Its a handmade sports car not a flaming kit car !!!


If at first you dont succeed,avoid skydiving...

No parachute require to freefall,only if you want to do it twice.
Reply With Quote
  #5  
Old 10th February 2016, 11:14 AM
TalonMotorFabrication TalonMotorFabrication is offline
Senior Member
 
Join Date: Jun 2011
Location: Southminster Essex
Posts: 260
Default

Quote:
Originally Posted by flyerncle View Post
Don't know why I bother.......
I now use the general rule of thumb that is if 3/4 of the answer has already been posted in the question then by the time you have looked up the answer and posted a reply then the penny would have already dropped. Conclusion: I also wonder why I bother so lately I don't.
__________________
Unofficially rated No.1 supplier of fabricated Haynes Roadster parts by the workshop rat population.

Direct email talonmotorfabrication@gmail.com
Reply With Quote
  #6  
Old 10th February 2016, 01:51 PM
flyerncle flyerncle is offline
Senior Member
 
Join Date: Mar 2008
Location: gateshead,near cobbly bit of A1 North
Posts: 3,188
Default

But you have.........
__________________
Cost : Little as possible.
Thanks : To those who by their generosity my build has progressed.
Its a handmade sports car not a flaming kit car !!!


If at first you dont succeed,avoid skydiving...

No parachute require to freefall,only if you want to do it twice.
Reply With Quote
  #7  
Old 15th February 2016, 07:43 PM
MrFozzieBear MrFozzieBear is offline
Junior Member
 
Join Date: Aug 2008
Posts: 18
Default

Quote:
Originally Posted by TheArf View Post
Good morning guys, a quick question for those that have been through the SVA, is there a set hight for the rear number plate. I have down loaded the manual and I think I'm suffering from legal jargon blindness, I have also down loaded the illustration from Westfield that gives all of the dimensions for the lights, minimum and maximum distances/heights etc.

Any help on this would be appreciated

Arfon
Hi,

There isn't really a minimum or maximum Height quoted for IVA as it looks to be based on the Road Vehicles (Display of Registration Marks) Regulations 2001. How vertical the plate is the main thing.

The Key thing is to make sure is you have a 520mm X 120mm minimum Space for a registration plate with clear visibility. Its worth noting the GB plates are smaller in length than this. (Although its not really a problem for our shape of cars).

Irrelevant to us as we go through IVA but there is a height Limit for European type approved vehicles. The plate for these need to be within 300mm - 1200mm from the ground.

Hope this helps,

Cheers.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 07:48 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.