Rear upright assembly

[voucht]

Originally Posted by alga

I'm thinking, what effect would such orientation have when bleeding the cylinders? A pocket of air against the piston might be a nightmare to get out.

The bleeder is of course on top position on the wheel cylinder and is at the highest point of it. So it is theoretically even easier to bleed than a flat mounted wheel cylinder.

http://www.haynes.co.uk/forums/attac...1&d=1357384227

Oscar, Phil (Talon) told in the first place to put them the other way around for drum brake, but if I do so, the handbrake cable sleeve is too short to go to the back of the drum flange. So I had to put them this way which I thought was the normal way for drums. But perhaps it isn't, and the disc set-up is "top holes towards the front" as well. Sorry to get you even more confused