|
#1
|
|||
|
|||
Quote:
David
__________________
Click to see my build photos on Flikr http://www.flickr.com/photos/67112582@N03/ Saturn MX5 Based Chassis, Limited Slip Diff & 2.4 Quick Rack. Build cost.... seems to be spending more on tools than car bits at the moment! (they will be handy in the future though). Car iva'd and passed 15/08/2014. Finished weight 572kg. |
#2
|
||||
|
||||
Here you go, David.
On a closer look I found a couple imperfections. There is something like traces of a different color embedded in the gel coat in one of the arches, like a slight smudge of dirt you cannot wipe away. There are also some minor surface imperfections in one place. But they are not really visible, hard to photograph :-) Here's the full gallery: https://picasaweb.google.com/1008810...s?noredirect=1
__________________
Albert Haynes Roadster FAQ | Haynes Builder Locations Gallery, build thread in Lithuanian / via Google Translate. |
#3
|
|||
|
|||
They look really nice. I'm waiting for my kit to be made (hopefully will collect it on Friday).
Please could you tell me how long your arches are? I am doing my exhaust and want to make sure it don't make it too long. Thanks David
__________________
Click to see my build photos on Flikr http://www.flickr.com/photos/67112582@N03/ Saturn MX5 Based Chassis, Limited Slip Diff & 2.4 Quick Rack. Build cost.... seems to be spending more on tools than car bits at the moment! (they will be handy in the future though). Car iva'd and passed 15/08/2014. Finished weight 572kg. |
#4
|
||||
|
||||
Collecting mine next week too!
|
#5
|
|||
|
|||
Are yours red?
__________________
Click to see my build photos on Flikr http://www.flickr.com/photos/67112582@N03/ Saturn MX5 Based Chassis, Limited Slip Diff & 2.4 Quick Rack. Build cost.... seems to be spending more on tools than car bits at the moment! (they will be handy in the future though). Car iva'd and passed 15/08/2014. Finished weight 572kg. |
#6
|
||||
|
||||
They are, apparently mine are being cut from the molds Monday morning.
|
#7
|
||||
|
||||
My AGM arches are 795 mm between the inner lower corners. They seem to be exactly the same size as the Triton/Gillham ones. The fronts of my arches are 18 cm forward off the lower corner of the side panel.
__________________
Albert Haynes Roadster FAQ | Haynes Builder Locations Gallery, build thread in Lithuanian / via Google Translate. Last edited by alga : 31st August 2013 at 10:57 PM. |
Thread Tools | |
Display Modes | |
|
|