#1
|
|||
|
|||
Pedal box/Brake cylinder
Hi all.
I am building the pedal box but the drawing on page54 dont show the height of the hole for the master brake cylinder. It looks like it is about 40mm. But If i draw a strait line from the pushrod hole in the pedal it will go down like 15mm. Is there anyone out there having foto/suggestiens of this. And i also whant to build it with the original angle on the master cylinder like Bonzo did, but i dont think that will make any differens on the height. Peter.
__________________
http://www.flickr.com/photos/swe7/ |
Thread Tools | |
Display Modes | |
|
|