Misfire

[Stot]

Originally Posted by Davidbolam

I'm on my 3rd set of leads. I'm going to see what the diagnostic light says tomorrow. The plugs are black so they may need changing but they have only turned black. I did replace the plugs when I put the ending in.

I've just tried to reset the base idle.

David

The last leads I sent you have exactly 2 miles on them and I didnt have a misfire using that coil and lead combo so I think you can rule that out.

I had this problem and sorted it and I am trying to figure out if it was just resetting the base idle that fixed it or If I did something else. Might have been that I had 2 of the loom plugs in the wrong way and it was giving me a solenoid error on the diag LED. The vacuum solenoid has the same plug as something else in that general area and i got them the wrong way round.

Cheers
Stot

Cheers
Stot