#1
|
|||
|
|||
Por 15
Has anyone used POR 15 to paint their chassis ? If so, does it need a primer ?
Peter |
#2
|
|||
|
|||
im planning to por15 my chassis. you probably know this but to use por15 you need to marine clean it (or use something else to degrease & clean the metal), metal ready it, then you need an undercoat and then a top coat.
The metal ready acts as the primer by etching the metal which will make the under coat stick. dan |
#3
|
|||
|
|||
I used Por 15 on my chassi, with the appropriate Marine Clean, and Metal Ready as under treatment. I painted it straight on the chassi without any undercoat and it turned out FAB and cheaper than a powdercoat.
/Fredrik
__________________
McSorley+Rorty+Gibbs Locost Builder Sweden |
#4
|
|||
|
|||
POR15 IS an undercoat! It works better if it's painted over a surface that's lightly rusted. My experience is that it peels off when painted on shiny steel. It needs a top coat to prorect it from UV.
Regards, Mike.
__________________
The 'CLUBHOUSE' Clubman Workshop |
#5
|
||||
|
||||
As I do not have a compressor can you brush paint it? If you can what sort of finish would you get.
|
#6
|
|||
|
|||
top coat
Can you use any type of paint as a topcoat, eg ordinary household gloss.
Cheers Peter |
Thread Tools | |
Display Modes | |
|
|