#11
|
|||
|
|||
Simply buy a non LSD Lobro diff and swap the Lobro shafts
|
#12
|
|||
|
|||
That is just what I did and you can see the result at the second picture.
The drive flanges will not fit. Regards, Cobra289
__________________
http://www.donostia.demon.nl 'Improvement' means that you recognize previous mistakes! |
#13
|
|||
|
|||
Bump! Any help?
__________________
http://www.donostia.demon.nl 'Improvement' means that you recognize previous mistakes! |
#14
|
|||
|
|||
There are 2 sizes of diff 7" and 7 1/2" there are also 2 sizes of Lobro, 100mm and 108mm diameters.
There are at least 2 thicknesses of drive shaft as well. I think at this stage i would fit any diff that i had and save the LSD for another day post build Or take it to a diff specialist, it may be a simple fix for them. Andy Bates at AB performance has a diff man he uses for swapping crown wheel and pinions to produce a 3.3 or 3.1 LSD, worth a call to him. |
Thread Tools | |
Display Modes | |
|
|