|
|
#1
28th May 2014, 08:44 PM
|
|||
|
|||
Bolt tensile strength
What tensile strength have my bolts got to be on the wishbones etc please ? 8.8 or the 12's ? Just wondered as I am about to go back through the car replacing stuff & torquing everything down & marking with my little tip ex pen all of the torqued bolts. Any help would be appreciated, I have the iva guide, but I must be going blind as I can't find anything about bolt strengths. Lol
 
|
|
#2
28th May 2014, 09:23 PM
|
||||
|
||||
|
I do not recall any specifics about bolt tensile strengths, but I would if I were you I'd have a minimum of 8.8 on all suspension components and seat mountings......I personally would also have them on the drive train and engine/gearbox mounts. like I say I cannot remember anything in the iva manual.....hope this helps
|
|
#3
29th May 2014, 08:25 AM
|
|||
|
|||
|
It does mention in IVA manual about bolt strengths for something but cant remember what,as a minimum you want 8.8 but for me stronger the better I use 10.9 or 12.
__________________
Cost : Little as possible. Thanks : To those who by their generosity my build has progressed. Its a handmade sports car not a flaming kit car !!! If at first you dont succeed,avoid skydiving... No parachute require to freefall,only if you want to do it twice.
|
|
#4
29th May 2014, 08:35 AM
|
|||
|
|||
|
Thank you both, I just didn't want to fail an iva on something silly like the wrong strength bolts. Loving the tango machine Kev, you have done yourself proud with that one ! Give up Kevo & build car no.2, you know that you want too !
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
