|
|
#1
11th April 2011, 06:09 PM
|
||||
|
||||
Selling up
OK folks, after several months of little activity, I have almost certainly decided to sell up. I need to raise some money for a different project, so if enough people show an interest I'll let it go. If not, then I'll have to just carry on the build.
Here's a list of stuff I'm selling and how much I want for them. The chassis is almost complete, with one bracket that needs moving as it's in slightly the wrong place. It has the rear rails for ali bodywork, but could be quickly altered for a fibreglass tub. All the wishbones were bought from either 3GE or Saturn, except the front lowers, which were a 3GE plate kit but have been professionally welded. The pedal box is also a 3GE kit, but also professionally welded. Chassis 250 Front Lower Wishbones 50 Front Upper Wishbones 40 Rear Lower Wishbones 50 Rear Upper Wishbones 50 Rear Uprights 80 Diff Brackets 20 Roll Bar (from AshG) 35 Seats and Runners 80 Pedal Box 80 Steering Rack & extensions 75 Steering Rack Clamps 15 Rod Ends and Ball Joints 45 Mushrooms 35 Protech Shocks With Springs 300 Headlamp Brackets (Saturn) 20 Polybush Set 75 Suspension Bolt Set 15 Please express an interest and I'll decide if I'm going to sell at the end of the week. Thanks Alan p.s. I also have some donor parts but I'm in the middle of refurbing them, so will flog em later. These include front uprights, diff, hubs and driveshafts, steering column, and front calipers. If there's anything not listed please ask as I may have forgotten it. I'm also going to be selling a complete R1 engine with almost everything needed to fit into a car.
__________________
Costs so far :- Too much but somehow not quite enough  http://alansroadster.blogspot.com/ 
|
|
#3
11th April 2011, 06:16 PM
|
||||
|
||||
|
what kind are the seats and could you post a picture of them?
|
|
#4
11th April 2011, 06:33 PM
|
|||
|
|||
|
I will take the seats mate. Let me know how much courier will cost when you decide to sell and i will paypal or bank transfer you when ready. Will also take the headlight brackets as well.
Last edited by Eternal : 11th April 2011 at 06:35 PM.
|
|
#5
11th April 2011, 06:43 PM
|
||||
|
||||
|
may be interested in the rack and clamps, what would postage be on those?
EDIT: what ratio is the rack and was it a new one or re-con? EDIT 2: damn someone beat me to it... o'well what colour are the polybushes? may be interested in those and the suspension bolt set Cheers Jake
__________________
its reight! is not a suitable measurement! Last edited by JakeH : 11th April 2011 at 06:50 PM.
|
|
#6
11th April 2011, 06:46 PM
|
|||
|
|||
|
Quote:
I frequently drive farther than that to work!!!!!!!!!!!!
|
|
#7
11th April 2011, 06:48 PM
|
|||
|
|||
|
County Durham to Dorset is a bit of a mission mate =P
|
|
#8
11th April 2011, 06:49 PM
|
||||
|
||||
|
Sorry to hear this Alan
 If you do decide to sell up then I,d be interested in the Protech shocks / springs....what poundage rates are the springs please? all the best with whichever route you take . cheers andy
|
|
#9
11th April 2011, 07:03 PM
|
||||
|
||||
|
OK, just to keep things simple, I'm just gonna put up the list with people's names next to the item they're interested in.
Chassis 250 Front Lower Wishbones 50 Front Upper Wishbones 40 Rear Lower Wishbones 50 Rear Upper Wishbones 50 Rear Uprights 80 Diff Brackets 20 Roll Bar (from AshG) 35 js1uk Seats and Runners 80 Eternal Pedal Box 80 Steering Rack & extensions 75 js1uk Steering Rack Clamps 15 Rod Ends and Ball Joints 45 Mushrooms 35 Protech Shocks With Springs 300 HandyAndy Headlamp Brackets (Saturn) 20 Eternal Polybush Set 75 Suspension Bolt Set 15
__________________
Costs so far :- Too much but somehow not quite enough http://alansroadster.blogspot.com/
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
