Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > General discussion
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 17th June 2017, 08:48 AM
twinturbo's Avatar
twinturbo twinturbo is offline
Super Moderator
 
Join Date: Jul 2008
Location: Carlisle
Posts: 4,276
Default Sumarise Where Your at...

So I thought this may generate some discussion.

Q1) How far along are you
Q2) How long since you last worked on the car
Q3) What are the major items to do
Q4) Whats holding you up


Q1) My chassis is fully trial fitted up and rolling, all the body work is mostly trial fitted and the seats have been test fitted. The dash was built including an ACEWELL cluster.

The 1.8CVH engine is in and has been run, the gearbox and prop are also in place although the rear gearbox mount needs finishing.

Rear lights are all done the mount for one front is 80% done.

Q2) November 2014 I think.

Q3)
Wiring.
Brakes
Roll Hoop
Cooling
Final strip and reassembly

Q4)
Stalled at doing the wiring, It's not that much of a job except when it comes to the dash which I think I counted 20+ wires to cram sort at the junction box. Since then Just been busy with other things and the garage has become an utter TIP!!

TT
__________________
You only get a woosh with a dump valve

Build Thread
CLAYTUNE WEBSITE
Cecil Street Auto Repairs Garage Carlisle




Build Cost £4181.65 - Last - Wheel Cylinders
Reply With Quote
  #2  
Old 17th June 2017, 09:49 AM
garyt garyt is offline
Senior Member
 
Join Date: Jun 2014
Location: Dufftown, scotland
Posts: 480
Default

Ok here we go;
Q1; finished and on the road, well they are never really finished .....
Q2; always tinkering, just can't leave well alone
Q3; new build.... ooo arhhh
Q4; more funds lol
Seriously it was great building her and really enjoy driving her got tyres and handling and performance sorted but have started fiddling so looking to build something again , there are more ideas in my head lol
__________________
remember we are not mad just creatively insane
Reply With Quote
  #3  
Old 17th June 2017, 12:08 PM
garyout garyout is offline
Senior Member
 
Join Date: Feb 2016
Location: Gosport Hampshire
Posts: 107
Default

Well!!!!


Q1 chassis all welded, seats fitted (Trial) engine, box and diff in, column in rad in was playing with pedal set up.

Q2 couple of months ago due to the hassle with panel supplies I have fallen out of bed with it shut the door and trying to forget about it

Q3 Everything

Q4 Funds!! Time!! a few hours in the week less so I don't make my boss so rich
Reply With Quote
  #4  
Old 17th June 2017, 12:18 PM
Dave F's Avatar
Dave F Dave F is offline
Senior Member
 
Join Date: May 2011
Location: Wakefield
Posts: 124
Default

Q1) Rolling Chassis, engine in (temporarily) pedalbox just about completed

Q2) Did 3 hours Wednesday, 4 hours the week before, that was after a 3 month break #revitalised.

Q3) in order (maybe some overlap):
1. Fuel - tank fitting, copper, filter, rubber.
2. Engine - removal, Timing belt, water pump, some gaskets, painting, refitting
3. Brakes - copper, flexi's, handbrake cable securing
4. Cooling - Radiator, expansion bottle, pipes
5. Wiring - test while complete, remove redundant circuits, retest, fix inevitable problems, tidy up.
6. Bodywork - Trail fit, lights, remove, paint, refit, then drop something on my nice fresh body work - swear.

Q4) wife, Silly season at work, kids, wife, money, wife, time, kids
__________________
God loves a trier

Actual cost so far = Have chosen to stop counting incase I incriminate myself -
Cost ive told the wife = A hell of a lot less than I have spent. -
Reply With Quote
  #5  
Old 17th June 2017, 05:34 PM
Ianr Ianr is offline
Senior Member
 
Join Date: Sep 2014
Posts: 191
Default

Q1 Car built and IVA'd and on the road
Q2 About two weeks ago but...
Q3 - car will never be finished - hope to improve braking, mainly at the rear and get the balance better, then screen er wipers, sidescreens and half hood, then improve the cooling pipe routing so I can actually get at them. Then...
Oh and I've started gathering parts for my next build - a Midlana.
Q4 got to finish a house extension I started last September - then money

You would never believe this was my fourth car build - the first 3 were all before I was 21 and I am now an OAP (the middle years were taken up with work which I think is much over rated :-) )
__________________
My build blog here http://ianhaynes20.wordpress.com
Reply With Quote
  #6  
Old 19th June 2017, 08:37 PM
alga's Avatar
alga alga is offline
Senior Member
 
Join Date: Feb 2009
Location: Vilnius, Lithuania
Posts: 1,247
Default

Q1) 4 years and 1 month on the road, 11300 km on the odometer.

Q2) I made a cone catcher about 4 weeks ago. It bolts to the bottom of the floor in front of the rear arches: https://goo.gl/photos/q95QWWqJZ8PPH7UE9 . Then a couple of days later I had to redo the alternator bracket AGAIN, cause the damn thing fell out after a sprint recon lap. https://youtu.be/vWEVcmj-dZE?t=3m56s

Q3) I have 2 conflicting directions: making the car more roadable and swapping ST170 on bike throttles in. Re roadability, greasing the PU bushings had an immense effect on the cars' ability to soak up road imperfections, but it only held for about a year and a half or so. But removing and greasing all the wishbones and bushings is a chore, so it doesn't get done. The other things are ordering a bigger silencer, as the exhaust noise really makes the head buzz after an hour of driving or so. Also, sidescreens should help a lot with wind buffetting. I have the steel frames done and one of them even has hinges mounted!

Re. ST170, I'm in the middle of lowering the sump since last spring or so, and I started mounting the GSXR750 throttles with 3d printed nylon adapters and trumpets this spring.

Q4) Mostly laziness and other hobbies.
__________________
Albert
Haynes Roadster FAQ | Haynes Builder Locations
Gallery, build thread in Lithuanian / via Google Translate.
Reply With Quote
  #7  
Old 25th June 2017, 10:34 AM
norton norton is offline
Senior Member
 
Join Date: May 2015
Posts: 390
Default

Q1) I think about halfway. I've broken the back of the major components though and now its bodywork, electrical and mechanical refinements.

Q2) Yesterday, sanding down some rear arches prior to polishing or more likely painting/wrapping.

Q3) The nose, bonnet and scuttle/dash, electrics and getting it running with a Megasquirt ECU.

Q4) A lack of money and time however I'm due to make my own scuttle and bonnet which will take some time to get perfect so will bridge the gap before more purchases can be made. I've never liked the idea of a fibreglass bonnet, I'd want to see metal when lifting the bonnet plus I want Caterham style louvres!
Reply With Quote
  #8  
Old 25th June 2017, 09:12 PM
tkpm tkpm is offline
Senior Member
 
Join Date: Sep 2009
Location: Bideford, Devon
Posts: 705
Default

Q1 - Nearing the end of the build.

Q2 - It's about 2 months since I worked on the roadster.

Q3 - I have to wire up all my gauges and sort a headlamp issue and get my wheel alignment set up done and final engine tune up and brake balance tested.

Q4 - Hopefully nothing now, as I've taken a weeks holiday to get everything done except the engine tune up.
__________________
If you need a friend, call me, if u need company call me, if you need help call me, if u need money this number is no longer available.
Reply With Quote
  #9  
Old 26th June 2017, 01:13 PM
Eternal Eternal is offline
Senior Member
 
Join Date: Mar 2010
Location: Bournemouth, Dorset
Posts: 598
Default

Q1) How far along are you:
Mechanically almost finished. Will be starting bodywork once brakes are finished.

Q2) How long since you last worked on the car:
1 month

Q3) What are the major items to do:
All bodywork, brake system, steering system finish

Q4) Whats holding you up:
Time and money
__________________
Build Cost: .............. lost count a while back.

Skyline Roadster
Reply With Quote
  #10  
Old 24th July 2017, 06:42 PM
MikeB MikeB is offline
Senior Member
 
Join Date: Apr 2007
Location: Nr Wellingborough
Posts: 499
Default

Q1) How far along are you:
Nearly ready for IVA

Q2) How long since you last worked on the car:
last month

Q3) What are the major items to do:
Small tidying, IVA trim, New Exhaust Link Pipe

Q4) Whats holding you up:
Time

20170507_123250 by mjb22001, on Flickr
__________________
Build Cost so far £xxx (Given up adding it up) - She Starts!! Build Thread Here:
http://www.haynes.co.uk/forums/showthread.php?t=5501
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 04:06 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.