Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > Bodywork and interior
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 7th October 2012, 11:18 PM
Talonmotorsport's Avatar
Talonmotorsport Talonmotorsport is offline
Senior Member
 
Join Date: Oct 2007
Location: Southminster Essex
Posts: 1,323
Default Windscreens mirrors mounts?

Now that I have my scuttle blank to play with I've been looking in to companies to make windscreens for me, turns out theres one not a million miles away that was approched by Caterham. They have done all the hard work not so long ago but where rejected on price but a right result never the less. For a reasonable price but not cheap they would be able to supply a fully kite marked and therefore an IVA approved sealed unit ready to fit.
What I'm currently looking in to is having the screen side mounts cast in either GRP or epoxy resin and having the mirror mounts incorporated in to them much like Westfield do. How ever this would mean that your choice of mirror would be limited by the mounting points.
I'm around 6-8 weeks from being able to make a working prototype but I'm hoping to be able to sell it as a complete kit that would just need a wiper mech. bolting straight on which I'm 80% sorted with.
__________________
Website http://www.talonmotorfabrication.co.uk/

Direct email phil@talonmotorfabrication.co.uk

talonmotorfabrication@gmail.com

Mobile office hours 07514098334
Reply With Quote
  #2  
Old 8th October 2012, 08:30 AM
voucht's Avatar
voucht voucht is offline
Senior Member
 
Join Date: Jun 2011
Location: Lautrec, Tarn (81), Occitanie, France
Posts: 879
Default

That's a good news Phil, I'll be definitely interested in a wind screen when time comes. Please keep us informed.
Reply With Quote
  #3  
Old 8th October 2012, 11:13 AM
wylliezx9r wylliezx9r is offline
Senior Member
 
Join Date: May 2010
Location: South Wales
Posts: 321
Default

Me too !

On a side note, would you need to have windscreen wipers to pass mot ? Note that is Mot not IVA.
Reply With Quote
  #4  
Old 8th October 2012, 01:16 PM
rpjg1975 rpjg1975 is offline
Senior Member
 
Join Date: Jun 2009
Location: School Aycliffe, County Durham
Posts: 556
Default

Don't quote me on it but is that one of those 'if its not there, I cant fail it' situations. I know my mate who is an mot tester failed a lorry which came in with a cracked windscreen, so the driver went into the car park, stuck his foot against the screen and removed it.....they had no choice but to pass it!

Last edited by rpjg1975 : 8th October 2012 at 01:24 PM.
Reply With Quote
  #5  
Old 8th October 2012, 01:17 PM
Talonmotorsport's Avatar
Talonmotorsport Talonmotorsport is offline
Senior Member
 
Join Date: Oct 2007
Location: Southminster Essex
Posts: 1,323
Default

Yes you would need wipers and washer jets that clear the screen if the screen is fitted to pass an MOT. The wiper mech. that I have in mind should be a direct bolt on part so no need to shorten linkages and should be a simple bolt together process.
__________________
Website http://www.talonmotorfabrication.co.uk/

Direct email phil@talonmotorfabrication.co.uk

talonmotorfabrication@gmail.com

Mobile office hours 07514098334
Reply With Quote
  #6  
Old 8th October 2012, 01:24 PM
jps jps is offline
Senior Member
 
Join Date: May 2012
Location: Colchester, Essex
Posts: 439
Default

Quote:
Originally Posted by Talonmotorsport View Post
What I'm currently looking in to is having the screen side mounts cast in either GRP or epoxy resin and having the mirror mounts incorporated in to them much like Westfield do.
Would the screen mounts be separate to the scuttle itself? I've heard elsewhere that it's easier to pass IVA without the screen, then fit it afterwards...
Reply With Quote
  #7  
Old 8th October 2012, 01:35 PM
Talonmotorsport's Avatar
Talonmotorsport Talonmotorsport is offline
Senior Member
 
Join Date: Oct 2007
Location: Southminster Essex
Posts: 1,323
Default

There are two schools of thought here about windscreens,rollbars,roll cages etc. One is if it is not fitted it can't be tested and therefore should be an easier process to gain a pass, the other is spend the time building the car pre IVA as you want it and if it's correct from the start it should go through hence why the screens will be kite marked as standard.
If you buy a plain scuttle to pass the IVA then decide you want to fit a screen then you would have to buy the other scuttle and the screen kit so in the long run it will cost you more in parts. The screen mounts will be separate to the screen but it's the sub frame that will be bonded in place that will be the difference between the two, due to the demister vents and the direct bolt on wiper mech. that I have in mind I would prefer to supply a product that is pre jigged to fit rather have people struggle to make it work and disappointed with it.
__________________
Website http://www.talonmotorfabrication.co.uk/

Direct email phil@talonmotorfabrication.co.uk

talonmotorfabrication@gmail.com

Mobile office hours 07514098334

Last edited by Talonmotorsport : 8th October 2012 at 01:43 PM.
Reply With Quote
  #8  
Old 8th October 2012, 03:28 PM
jps jps is offline
Senior Member
 
Join Date: May 2012
Location: Colchester, Essex
Posts: 439
Default

Could I buy the 'screen kit and scuttle' but only fit the scuttle before IVA - then do the rest once it was IVA'd? Or would i then have nowhere to hang my mirrors?
Reply With Quote
  #9  
Old 8th October 2012, 08:42 PM
flyerncle flyerncle is offline
Senior Member
 
Join Date: Mar 2008
Location: gateshead,near cobbly bit of A1 North
Posts: 3,188
Default

If the windscreen opens you dont need wipers

8.2 page 1 of the manual.
__________________
Cost : Little as possible.
Thanks : To those who by their generosity my build has progressed.
Its a handmade sports car not a flaming kit car !!!


If at first you dont succeed,avoid skydiving...

No parachute require to freefall,only if you want to do it twice.

Last edited by flyerncle : 8th October 2012 at 08:46 PM. Reason: sad git went and read manual.
Reply With Quote
  #10  
Old 8th October 2012, 08:48 PM
flyerncle flyerncle is offline
Senior Member
 
Join Date: Mar 2008
Location: gateshead,near cobbly bit of A1 North
Posts: 3,188
Default

Another thought and more hassle,if you need de-misters you need a heater if you fit a screen.
__________________
Cost : Little as possible.
Thanks : To those who by their generosity my build has progressed.
Its a handmade sports car not a flaming kit car !!!


If at first you dont succeed,avoid skydiving...

No parachute require to freefall,only if you want to do it twice.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 12:37 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.