#1
|
|||
|
|||
Seat width
I have found some bucket seats, width at runners is 39cm and overall width is 50cm at the widest point. Would they be worth a try?
Cheers Russ |
#2
|
||||
|
||||
Hi Russ
I have just had a quick measurement of my chassis. The width between the inside of the side rails & the transmission tunnel is proximately 450mm. Got shot of a very nice set of Cobra seats due to the width, If only I gave it some better thought. Probably could have made the transmission tunnel a bit narrower to allow the fitting of a slightly wider seat. That said, those Two Cobra seats weighed nearly as much as the bare chassis
__________________
I am not a complete idiot...........Some of the parts are missing !! Ronnie www.roadster-builders.co.uk |
#3
|
|||
|
|||
Cheers Ronnie,
Just wondering if they're worth a punt cos they arent expensive. Presumably there would be a bit of 'squidge' is the base side boulsters or wonder if a could take a little off the side foam to get some space? I take it there would be a bit more space to be had above the bottom chassis rail going to the outer side panel too... Russ |
Thread Tools | |
Display Modes | |
|
|