#1
|
|||
|
|||
Transit Tie Rod/ Drag Link
Hey guys,
Found this in a pile of stuff that may be of some use to someone. Its a Transit tie rod/drag link off a Ford Transit 1985-1992 Tie Rod End, The Quintinn Hazel number is QR 2392S, LH thread, Cone Size: 16,2 mm, Outer Thread [mm]: M20X1,5 Not sure if this is the one required for the roadster? |
#2
|
||||
|
||||
I believe the roadster uses right-handed versions on both ends.
__________________
Albert Haynes Roadster FAQ | Haynes Builder Locations Gallery, build thread in Lithuanian / via Google Translate. |
#3
|
||||
|
||||
-- Transit 1965 to 84 Drag Link End Right Hand Thread
Ford Part Number :17996516 QH (Quinton Hazel) Part Number QD1117RHT M18 x 1.5 not M20 x 1.5
__________________
Be Lucky, Mike. |
#4
|
|||
|
|||
maxi ball joints
Hi everyone I wanted to know if someone could help me I'm in south africa and its very hard to find a austin maxi ball joint and cause I have no dimensions of it so I was told on this forum that I should take a look at the mini cooper lower ball joints and the dimensions look the same only thing though is that I won't use a 19 mm taperd reamer ill have to use a smaller one so I wanted to find out if that will be ok to use as an alternative or does anyone have a better idea .thanks
|
#5
|
|||
|
|||
ball joint
I'm not sure about the sierra hubs but i'm using scorpio hubs and a 16 mm non tapered ball joint from a peugeot 306 that just bolts in like the original.
As i say, i don't know if this helps but her is the link to the ball joints i fitted. http://www.ebay.co.uk/itm/GENUINE-PE...-/320636614293 |
Thread Tools | |
Display Modes | |
|
|