Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > General discussion
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #121  
Old 21st April 2016, 10:41 PM
RichardH RichardH is offline
Senior Member
 
Join Date: May 2015
Location: fife scotland
Posts: 177
Default

Reply With Quote
  #122  
Old 22nd April 2016, 09:00 AM
Rosco Rosco is offline
Senior Member
 
Join Date: Sep 2014
Posts: 493
Default

are you using those adjuster on all the wishbones? its just you might find the pitch Isnt fine enough when you come to doing your alignment, I'm using fine thread rose joints (1/2" unf i belive) and its amazing how much half a turn affects things
__________________
http://www.haynes.co.uk/forums/showthread.php?t=13517

My Build Thread
Reply With Quote
  #123  
Old 22nd April 2016, 09:26 AM
SteveH1 SteveH1 is offline
Senior Member
 
Join Date: Jun 2015
Location: Dublin Ireland
Posts: 291
Default

Quote:
Originally Posted by Rosco View Post
are you using those adjuster on all the wishbones? its just you might find the pitch Isnt fine enough when you come to doing your alignment, I'm using fine thread rose joints (1/2" unf i belive) and its amazing how much half a turn affects things
Thanks but bit late for that now have bought the threaded tubes for them already. Sure it will give me something to do remaking them in the future when ever if finish 😃
__________________
Slowly tipping over the edge into madness
Reply With Quote
  #124  
Old 22nd April 2016, 09:28 AM
SteveH1 SteveH1 is offline
Senior Member
 
Join Date: Jun 2015
Location: Dublin Ireland
Posts: 291
Default

Quote:
Originally Posted by RichardH View Post
Thanks had intended to wait till i had seats and all steering until i did it
__________________
Slowly tipping over the edge into madness
Reply With Quote
  #125  
Old 26th April 2016, 09:58 PM
SteveH1 SteveH1 is offline
Senior Member
 
Join Date: Jun 2015
Location: Dublin Ireland
Posts: 291
Default

Started on my wishbones
I was dreading these a bit but the first one worked out fine

Untitled by stephen harborne, on Flickr
The two bush tubes and the m16 x 1.5 threaded tube for the ball joint clamped in place

Untitled by stephen harborne, on Flickr
The first arm tacked in place

Untitled by stephen harborne, on Flickr
one side welded

Untitled by stephen harborne, on Flickr
Other side welded
__________________
Slowly tipping over the edge into madness
Reply With Quote
  #126  
Old 26th April 2016, 09:58 PM
SteveH1 SteveH1 is offline
Senior Member
 
Join Date: Jun 2015
Location: Dublin Ireland
Posts: 291
Default

Untitled by stephen harborne, on Flickr
Cleaned up a bit

Only seven more to do
__________________
Slowly tipping over the edge into madness
Reply With Quote
  #127  
Old 26th April 2016, 11:45 PM
vmax1974's Avatar
vmax1974 vmax1974 is offline
Senior Member
 
Join Date: Apr 2011
Location: Teesside
Posts: 1,141
Default

Looking good following your build with interest
Reply With Quote
  #128  
Old 27th April 2016, 09:33 AM
garyt garyt is offline
Senior Member
 
Join Date: Jun 2014
Location: Dufftown, scotland
Posts: 480
Default

good work there, I think its all the prep that kinda makes it a though , but once you get going its fine
Look forward to the next 7 pics
__________________
remember we are not mad just creatively insane
Reply With Quote
  #129  
Old 6th May 2016, 07:37 PM
alga's Avatar
alga alga is offline
Senior Member
 
Join Date: Feb 2009
Location: Vilnius, Lithuania
Posts: 1,249
Default

Wishbones are easy and fun, I don't get why people are making a fuss out of them. I found a ditch, and the front wishbone has buckled in the middle of the tube. My crappy amateur welds held fine. Getting the plate lasered and bent took more time than making the replacement wishbone. I had some spare bush tubes and a suspension bracket. I didn't make a full jig, just a 25x25 tube tacked onto a 3 mm sheet, with the bush tubes clamped onto it. The wishbone plate just sat on 10 mm spacers (M12 nuts probably) above the centreline marked on the jig plate.

http://locost.lt/download/file.php?id=1012&mode=view
http://locost.lt/download/file.php?id=1015&mode=view
__________________
Albert
Haynes Roadster FAQ | Haynes Builder Locations
Gallery, build thread in Lithuanian / via Google Translate.
Reply With Quote
  #130  
Old 31st July 2016, 11:47 AM
SteveH1 SteveH1 is offline
Senior Member
 
Join Date: Jun 2015
Location: Dublin Ireland
Posts: 291
Default

Ok so its been a while but i have been tipping away

Untitled by stephen harborne, on Flickr

Untitled by stephen harborne, on Flickr

Untitled by stephen harborne, on Flickr
Rear upper wishbone
__________________
Slowly tipping over the edge into madness
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 01:07 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.