#11
|
|||
|
|||
thanks handy , keep me informed!
|
#12
|
||||
|
||||
Take a look at this thread -- it should have the dimensions you need:
http://www.haynes.co.uk/forums/showt...?t=3578&page=5
__________________
Albert Haynes Roadster FAQ | Haynes Builder Locations Gallery, build thread in Lithuanian / via Google Translate. |
#13
|
|||
|
|||
havent updated for ages!
weve been busy building, so far the chassis is all welded up , built the wishbones mocked up the engine and gearbox , had the prop shortened. Made a sweet full rollcage same as the plans on the forum i found, will get some photos up this weekend! last weekend we painted the rollcage and chassis, its looking good! got to paint the wishbones and uprights tomorrow. Hopefully be fitting the aly floor this weekend just waiting for a mate to deliver the sheet. Yesterday we recieved our long awaited package, inside was the following; Front 283mm Midilite kit , inc pads, x-drilled and grooved disks. Rear Dynapro with 257mm disc., pads x-drilled and grooved. These are a new conversion, even lighter 2 pot rear wilwood calipers GRP seats TRS harnesses RMD Wheels in black Polybush set Mushrooms protech shockers and springs i will get some photos up cause the brake kits are awesome! weve fitted an obp pedal box fitted with wilwood master cylinders, so im hopeing that should sort out the braking! Im a late braker next week we should recieve the bodykit from saturn were getting there photos https://picasaweb.google.com/1084927...eat=directlink what you think? thanks Mike |
#14
|
||||
|
||||
very nice
trying to work out how you managed to get the ally parts of the engine so clean? thems shiney! JakeH
__________________
its reight! is not a suitable measurement! |
#15
|
||||
|
||||
its silver paint thats why it is shiney and new
|
#16
|
|||
|
|||
yep,i cheated, its been painted!
thanks mike |
#17
|
|||
|
|||
update time
im fitting the bodywork at the moment , its coming along nicely,i was abit nervous cutting it about though! more progress pictures in my album. Take a look! https://picasaweb.google.com/1084927...eat=directlink Thanks Mike |
#18
|
||||
|
||||
Been doing my side pannels too.. I had to trim the lower lip as it was not passing the floor.
Yours is looking good TT
__________________
You only get a woosh with a dump valve Build Thread Man Cave Mantiques Cecil Street Auto Repairs Garage Carlisle Build Cost £4181.65 - Last - Wheel Cylinders |
#19
|
|||
|
|||
yes, mine was a tight fit too. Im now on the rear wings , but try as i might i cant line them up proberly (see other post!)
thanks Mike |
Thread Tools | |
Display Modes | |
|
|