|
|
|
|
#1
12th November 2009, 09:43 PM
|
|||
|
|||
VIN Plate
I have a chassis number allocated to my car by DVLA, I have stamped this into the chassis & need to make a plate for the body, does anyone who has already done this have a photo of it (with numbers distorted of course!)?, I believe it should state the number & manufacturer`s details in one line?, what have you put for manufacturer, just Haynes special or something like that?? Thanks, Dennis.
|
|
#2
13th November 2009, 12:26 PM
|
||||
|
||||
|
Try this link ,scroll down to one listed for kitcars,looks a bit more professional i think and only 8.95 incl postage,or look at this one under ford(yes ford).
Code VW 1. VW VOLKSWAGEN VIN Chassis Plate . http://www.vin-plate.co.uk/
|
|
#3
13th November 2009, 07:48 PM
|
||||
|
||||
|
I didn't bother with a plate, just stamped the vin number into the chassis and a stamped bit of ali rivetted to the bulkhead. No problem with dvla.
AndyH
__________________
Haynes Roadster / Saturn GRP Bodywork. Now available direct through http://www.gillhamonline.co.uk/ or contact me direct on andrew.hugill@ntlworld.com Regards..........AndyH
|
|
#4
13th November 2009, 08:53 PM
|
|||
|
|||
|
Thats what I was intending, but I read a thread over on locost forum where a guy had failled IVA due to no manufacturer name on his plate, when I checked in the IVA manual it says you need this & it has to be in a single line? Dennis.
|
|
#5
13th November 2009, 09:02 PM
|
|||
|
|||
|
May be worth getting some Haynes specific plates made, I know that Robin Hood/GBS do some for there cars and have come across reproduction Lotus Seven VIN plates on ebay by a company in Sennen cove
|
|
#6
14th November 2009, 10:24 AM
|
||||
|
||||
|
Sennen Cove - do you have any details, I am 10 mins from there!
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
