#1
|
|||
|
|||
Mushroom orientation
Hi Could anyone advise in which direction the offset on the mushroom inserts is meant to point ? it appears to point towards the back of the upright or into the centre of the chassis from the picture on page 73
Regards Rob |
#2
|
||||
|
||||
Centre - Front I think
|
#3
|
|||
|
|||
On that page (#73) it states in the text of paragraph 3, "The hole must be tight in the suspension upright with the hole at the front."
|
#4
|
|||
|
|||
Brilliant thanks for this
|
#5
|
|||
|
|||
It gives a good amount of self center at the front and after IVA move them to 11 o'clock on the left one and 2 o'clock on the right to give better feel to steering and better handling.
Dont forget to provide some locking device for IVA.
__________________
Cost : Little as possible. Thanks : To those who by their generosity my build has progressed. Its a handmade sports car not a flaming kit car !!! If at first you dont succeed,avoid skydiving... No parachute require to freefall,only if you want to do it twice. |
#6
|
|||
|
|||
Quote:
I am struggling to imagine how you'd secure it, then turn it and resecure it...
__________________
http://meandthekitcar.wordpress.com/ |
#7
|
|||
|
|||
sorry to jump in but I'm at the same stage. I know the mushrooms are meant to be tight but i can barely fit mine in at all which would be fine if i can get them spot on but i'll never be able to move the orientation of the hole as you suggest. How are yours for going in?
__________________
Build photos: http://s1056.photobucket.com/albums/t362/benbrooks1/ |
#8
|
|||
|
|||
have you reamed the uprights?
there is a reamer that does the rounds if you search the previous posts m8 |
#9
|
|||
|
|||
|
#10
|
||||
|
||||
he's talking about the whole mushy
|
Thread Tools | |
Display Modes | |
|
|