|
|
#1
4th January 2011, 09:31 PM
|
|||
|
|||
Newbie saying hello before he starts asking for help :-)
Hi everyone just a quick post to introduce myself. I've been reading this forum for 6 months now deciding whether i had the necessary skills to "build my own sports car" (and the answer is probably not) but i've finally lavished enough gifts on the wife for her to let me try and do it anyway.
I decided to go for a flat pack chassis which i ordered of Andy the other day, that should be here in a couple of weeks, which leaves me just enough time to clear the garage and atempt to learn to weld!!! So apologies to everybody in advance for the hundreds of impending and possibly stupid questions that i'll be asking. Fatbungy aka steve  
|
|
#2
4th January 2011, 09:35 PM
|
||||
|
||||
|
Welcome to the forum Steve.
As you've been reading the forum you will be aware that there is lots of useful info on here. Check the amendments thread as there are lots of guides in there. Have fun and feel free to ask the most simple of questions we've all been there at some point.
|
|
#3
4th January 2011, 09:58 PM
|
||||
|
||||
|
welcome, ask away
|
|
#4
4th January 2011, 10:38 PM
|
||||
|
||||
|
Welcome along. Where abouts are you from?
__________________
~ My Build Diary - http://davesroadster.blogspot.com/ *updated 7/6/11* Best bit so far: Getting it running Worst bit so far: Cutting steel for wishbones and engine mounts. Most annoying bit so far: Generator packing up half way through welding.
|
|
#5
4th January 2011, 10:50 PM
|
||||
|
||||
|
Welcome,
A lot of people think they can't do it ( it's building a car after all ) but when you break down to the bits and bobs then each stage is less daunting. TT
__________________
You only get a woosh with a dump valve Build Thread Man Cave Mantiques Cecil Street Auto Repairs Garage Carlisle Build Cost £4181.65 - Last - Wheel Cylinders
|
|
#6
5th January 2011, 07:47 AM
|
||||
|
||||
|
Welcome to the forum Steve
As others have said, lots of helpful info on here & all the members have been in the same position, enjoy your build & if you get stuck then just ask away,  cheers Andy
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
