Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > Running gear
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 2nd August 2016, 08:15 PM
CarlW CarlW is offline
Member
 
Join Date: Aug 2016
Posts: 98
Default Sierra Front And Rear Uprights

Hi Guys,

Couple of quick questions.

Does anyone have measurements for the rear uprights to accomodate Sierra hub carrier (6 bolt type for rear disc)

What ball joints options do I have for the lower ball joints on the front hubs?
I have read about some needing reeming out.
I can CAD design new lower wishbones and have parts made as needed.

I do have a full set of Cortina hubs etc but told these are no good for a Haynes Roadster?


Cheers All!!!!
Reply With Quote
  #2  
Old 3rd August 2016, 09:23 AM
flyerncle flyerncle is offline
Senior Member
 
Join Date: Mar 2008
Location: gateshead,near cobbly bit of A1 North
Posts: 3,188
Default

The rear plate is the same for disc/drum only orientation is different to clear caliper.

Sierra hubs do need to be reamed out and Cortina parts geometry is wrong for Haynes set up as far as I am aware.
__________________
Cost : Little as possible.
Thanks : To those who by their generosity my build has progressed.
Its a handmade sports car not a flaming kit car !!!


If at first you dont succeed,avoid skydiving...

No parachute require to freefall,only if you want to do it twice.
Reply With Quote
  #3  
Old 3rd August 2016, 09:30 AM
CarlW CarlW is offline
Member
 
Join Date: Aug 2016
Posts: 98
Default

Hi,

Where can I get the measurements for the rear plates as the CAD model I have must be for something else, not Sierra.


Cheers!
Reply With Quote
  #4  
Old 3rd August 2016, 02:46 PM
flyerncle flyerncle is offline
Senior Member
 
Join Date: Mar 2008
Location: gateshead,near cobbly bit of A1 North
Posts: 3,188
Default

From the book or buy from ebay.
Possible someone will have in CAD of other format.

The rear carrier is only different to take the caliper mounts,bolt hole pitch is the same.
__________________
Cost : Little as possible.
Thanks : To those who by their generosity my build has progressed.
Its a handmade sports car not a flaming kit car !!!


If at first you dont succeed,avoid skydiving...

No parachute require to freefall,only if you want to do it twice.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 09:39 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.