Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > Electrics
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 24th September 2009, 08:35 PM
HandyAndy's Avatar
HandyAndy HandyAndy is offline
Senior Member
 
Join Date: Jan 2009
Location: cleveland
Posts: 3,917
Default speedo cable

working on my speedo cable today, it seems a mighty tight bend in the cable once its attached to the gearbox with the circlip
i know there are angled devices available so that the cable runs straight but these seem very expensive for what they are,

so ..... what have others done?

a thought i had was to run the cable from where it connects onto the gearbox then in to the cockpit area along BR11 & BR4 then up behind the steering column to the instrument pod, would this be acceptable or should i just accept the tight bend within the transmission tunnel route?

your idea,s / advice please.

cheers
andy
__________________
Flat Pack Chassis Kits for sale, contact me at andyroadster@yahoo.co.uk
Reply With Quote
  #2  
Old 24th September 2009, 09:48 PM
frankie boy's Avatar
frankie boy frankie boy is offline
Senior Member
 
Join Date: Apr 2007
Location: Chingford, London
Posts: 191
Default

Hi
I would bite the pullet and get the angle drive. The tight bend will wear and soon be noisey.
__________________
my Roadster
http://www.flickr.com/photos/15477685@N06/
Reply With Quote
  #3  
Old 24th September 2009, 09:55 PM
HandyAndy's Avatar
HandyAndy HandyAndy is offline
Senior Member
 
Join Date: Jan 2009
Location: cleveland
Posts: 3,917
Default

ok thanks Frank, being honest with myself i think thats the best way forward, its just in my nature to look for a locost option first

cheers
andy
__________________
Flat Pack Chassis Kits for sale, contact me at andyroadster@yahoo.co.uk
Reply With Quote
  #4  
Old 24th September 2009, 10:18 PM
dogwood's Avatar
dogwood dogwood is offline
Senior Member
 
Join Date: Mar 2008
Posts: 899
Default

I just bent mine round
I did releive the alloy a bit (Ie big hammer).
So as to give a bulge in the side panel
where the cable touches
I've done about 3000 miles now with no probs


I suppose you want a picture now ......

David
Reply With Quote
  #5  
Old 24th September 2009, 10:36 PM
HandyAndy's Avatar
HandyAndy HandyAndy is offline
Senior Member
 
Join Date: Jan 2009
Location: cleveland
Posts: 3,917
Default

Quote:
Originally Posted by dogwood View Post

I suppose you want a picture now ......

David
David... you,ve just had me laughing out loud with that comment above, so much so all the dogs have jumped up & are looking at me as if saying " whats up with you"???

nah its ok, i get the idea, as i spent some time on it this afternoon wondering what would be a locost solution, tho didn,t think of the big hammer !!!

andy
__________________
Flat Pack Chassis Kits for sale, contact me at andyroadster@yahoo.co.uk
Reply With Quote
  #6  
Old 20th October 2009, 05:00 PM
gus's Avatar
gus gus is offline
Senior Member
 
Join Date: Oct 2008
Location: Taunton
Posts: 174
Default

Don't mean to hijack this thread but what route have people been using for the speedo cable?

My gauges will be similar to spud69 with them being in the middle of the dash. Cable seems really long, you could nearly go around the engine bay with it!!

Any advice appreciated.

Mark
Reply With Quote
  #7  
Old 20th October 2009, 05:33 PM
dogwood's Avatar
dogwood dogwood is offline
Senior Member
 
Join Date: Mar 2008
Posts: 899
Default

Quote:
Originally Posted by gus View Post
Cable seems really long, you could nearly go around the engine bay with it!!
Mark
Yup your right.

Twice round the deck once round your neck and you your A** as a stopper..

David
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 03:40 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.