Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > Announcements
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 21st July 2012, 12:23 AM
The V8 Files The V8 Files is offline
Senior Member
 
Join Date: Jul 2011
Location: Biggleswade, Bedfordshire
Posts: 346
Default Baby steps with the TIG welder

I've had my TIG sitting round for a while now and have just picked up gas this week and got regs etc so I couldn't help myself but have a little play.

I've not welded for 20 years and then it was MIG/Gas but given that and that the only piece of steel I had to hand was a dirty old piece of 6mm angle I'm not too ashamed of the results. They obviously need a lot of improving but I dont think too shabby for just getting back on the bike

Reply With Quote
  #2  
Old 21st July 2012, 11:10 AM
michael92 michael92 is offline
Senior Member
 
Join Date: Mar 2011
Location: boston lincolnshire
Posts: 322
Default

that bead far left looks nice and neat , i reckon a few less amps and that would have been a goodun!
Reply With Quote
  #3  
Old 21st July 2012, 03:27 PM
The V8 Files The V8 Files is offline
Senior Member
 
Join Date: Jul 2011
Location: Biggleswade, Bedfordshire
Posts: 346
Default

Cheers Michael, I worked from right to left so was just starting to get a bit of a feel for it by then, I'm going to practice on some more scrap and then try welding up some shelf supports for my Mum's garage. I'm also hoping to get on a course for September to get some theory and proper training.

Once I started to get the feel for the 'pool' a little better I really enjoyed it, definitely seems much nicer to do than Mig, although doing it on a flat piece of metal is one thing but upside down in dark cranny will probably be much harder, still got to figure out some of the settings on my Tig as well
Reply With Quote
  #4  
Old 21st July 2012, 04:42 PM
michael92 michael92 is offline
Senior Member
 
Join Date: Mar 2011
Location: boston lincolnshire
Posts: 322
Default

its certainly a nice start , you should have seen my attempts at tig a good practice is to do corner welds with no filler then you can get a real feel for what the pool is doing and when you get it nice it comes out a beautiful rainbow colour

its much more relaxing and gives more sence of aacievment than mig doesn't isnt it
Reply With Quote
  #5  
Old 22nd July 2012, 05:25 PM
vmax1974's Avatar
vmax1974 vmax1974 is offline
Senior Member
 
Join Date: Apr 2011
Location: Teesside
Posts: 1,141
Default

Would love a tig set but funds dont allow at the moment
Reply With Quote
  #6  
Old 22nd July 2012, 08:48 PM
Dualist's Avatar
Dualist Dualist is offline
Senior Member
 
Join Date: May 2012
Location: In a shed in Poland (Boston).
Posts: 152
Default

If you were doing ali the two verticals in the center would be sweet
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 05:53 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.