i have to save for a wedding so my project will have to end

[greasemonkey]

i will be selling,

1 armoto cnc'd wooden wishbone jig for making your front and rear wishbones, unused so not burnt £15
2.0 zetec silver top engine f rom a 1997 mondeo £100 (bare)
1.8 cvh engine bare (stamped 1991) from f reg sierra (req cambelt & tensioner) £100
7.5" diff from a 1991 sierra with bolt on type shafts £60(used)
7" diff from f reg sierra 1.8 push in type shafts £60 (used)
mk2 escort standard steering rack (recon) £50
1 pair of modified uprights (new) £80
1 set of gsxr 600 srad carbs £40(without trumpets & flanges )
1 pair of front vented type brake calliper's (new ap locheed) and discs for sierra 1.8 f reg (new/stored ap locheed) £100
1 steering columbs with steering wheels from sierra £50
full sierra wiring loom with fuse box £30
1 pair of push in used half shafts( f reg 1.8 cvh 7" type) £40
1 pair of bolt on used halfshafts (j sierra 2.0 dohc 7.5" type)£40
1 unfinnished chassis with all the plates and diff brackets,and u brackets (some welded some tacked on) £200
1 willans race harness with groin straps etc fia approved (out of date for racing use) £50
1 propshaft (mt75 split type) £25
1 front suspension jig from saturn sc £50
1 f reg sierra servo with master cylinder fluid resevoir and top with switch £25
1 f reg sierra rear brake valve £5
sierra coolant bottle £10
cvh inlet manifold with carb £20
cvh exhaust manifold £10
few other bits and bobs just ask



i live close to junction 1 of the m60 (stockport) if anybody wants to make me a sensible offer for the lot or any of the bits please pm me

buyer pays postage or collects
i started this project with good intentions but getting wed etc is more of a priority in the future wifes eyes

ps i have a 1.8 cvh (£100) on a which needs the cambelt and tensioner changing, the engine was a reconditioned unit 2 years before i got the first donor vehicle i removed it to check the condition of the water pump etc which felt rough so i left the engine timed up but didnt fully fit the bits as i had the intention to fit new parts, then i got a zetec and changed my mind.

i thought id give you guys a chance before i put bits on ebay

[mr henderson]

Originally Posted by greasemonkey

if anybody wants to make me a sensible offer for the lot or any of the bits please pm me

I don't need any of those bits myself, but I think you would do a lot better to put the prices you want on the parts, rather than wait for 'sensible offers'. It's a bit more work, I know, but I expect it will be worth it.

[KenK]

I have sent pm

[eSteve]

Sorry to hear you are selling-up and congratulations on your fourth coming marriage. A car build can be postponed but a good woman needs to be snapped up immediately!

I'll take the:

1 megajolt tps type ecu & loom (tested on laptop and it works when powered and accepts a map but not been on a car yet) £100 or £150 with coil pack & edis unit.

The full monty with the coil pack and EDIS please.

PM me with details of how you want paying, etc.

Thanks,

[Andy_B]

I will have the wishbones if you could send me your details for payment

[tkpm]

I would love the rear calipers and disc's.
But i have to had to pay for my daughters wedding tomorrow. if they have not gone within the next couple of weeks i will have them off you.

Terry

ps. can you find out a p&p for these please

[JHewitt]

Hey, thats a lot of gear you are having to shift, shame you are abandoning.

I am up for the shocks, can you give more info i.e. condition?

Cheers, Joe.

[greasemonkey]

check your pm

[rapidtornado]

if the shocks and transit drag links are new I'll take them

Cheers
Rapid

[rapidtornado]

Sorry Joe, didn't read your post... you were obviously first dibs on the shocks...