Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > Bodywork and interior
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 19th January 2016, 05:54 PM
TalonMotorFabrication TalonMotorFabrication is offline
Senior Member
 
Join Date: Jun 2011
Location: Southminster Essex
Posts: 260
Default side mirrors?

...................
__________________
Unofficially rated No.1 supplier of fabricated Haynes Roadster parts by the workshop rat population.

Direct email talonmotorfabrication@gmail.com

Last edited by TalonMotorFabrication : 3rd March 2016 at 10:10 PM.
Reply With Quote
  #2  
Old 19th January 2016, 07:19 PM
garyt garyt is offline
Senior Member
 
Join Date: Jun 2014
Location: Dufftown, scotland
Posts: 480
Default

hi Phil, fwiw I ve used a widebody westfield screen pillars and mirrors , not through iva myself but on the basis that westy's go through it with them then they should be fine. the lower screen edges needed fettling and the lower part of the stanchions too.
I think there would need to be some sort of standardisation on the scuttles as they are slightly different (I used Saturn / gillham).
I did put a windscreen thread up, with how I did it
good luck
__________________
remember we are not mad just creatively insane
Reply With Quote
  #3  
Old 19th January 2016, 07:24 PM
garyt garyt is offline
Senior Member
 
Join Date: Jun 2014
Location: Dufftown, scotland
Posts: 480
Default

https://haynes.co.uk/forums/showthre...t=13639&page=3
here is a link to the thread that has the details of wot I done
__________________
remember we are not mad just creatively insane
Reply With Quote
  #4  
Old 19th January 2016, 08:16 PM
TalonMotorFabrication TalonMotorFabrication is offline
Senior Member
 
Join Date: Jun 2011
Location: Southminster Essex
Posts: 260
Default

...............................
__________________
Unofficially rated No.1 supplier of fabricated Haynes Roadster parts by the workshop rat population.

Direct email talonmotorfabrication@gmail.com

Last edited by TalonMotorFabrication : 3rd March 2016 at 10:10 PM.
Reply With Quote
  #5  
Old 19th January 2016, 09:24 PM
garyt garyt is offline
Senior Member
 
Join Date: Jun 2014
Location: Dufftown, scotland
Posts: 480
Default

that would be a good cost effective way of dealing with the scuttle variation as once you have the "fillet" moulds these could be produced as required, the westfield pillars are often available quite reasonably priced if you were after a set to experiment with. These have the benefit of having mirrors attached although the early ones don't have the mirror boss.
I reckon it would have to be flexible / adaptable as we are speaking of quite a small market for 7 esque cars and then take off the ones who prefer the aero approach it would be very low volume , I think ...... although there is no one filling the gap at present.
The next thing to source are small wiper arms and blades, wiper motors/drive old mini or mgb will fit the bill with the addition of an earth the mgb one plugs straight into an mx5 loom connector thus giving all std operations
__________________
remember we are not mad just creatively insane
Reply With Quote
  #6  
Old 20th January 2016, 02:34 PM
TalonMotorFabrication TalonMotorFabrication is offline
Senior Member
 
Join Date: Jun 2011
Location: Southminster Essex
Posts: 260
Default

..................
__________________
Unofficially rated No.1 supplier of fabricated Haynes Roadster parts by the workshop rat population.

Direct email talonmotorfabrication@gmail.com

Last edited by TalonMotorFabrication : 3rd March 2016 at 10:11 PM.
Reply With Quote
  #7  
Old 20th January 2016, 03:50 PM
garyt garyt is offline
Senior Member
 
Join Date: Jun 2014
Location: Dufftown, scotland
Posts: 480
Default

that sounds promising, the westy screen I bought was £160 + £25 for the plywood shipping box +vat and carriage tot was £240 ish, the supports/mirrors I bought second hand, but again if looking at that style a second hand pair could provide "inspiration".
as a thought many years back we did rc model aircraft fuselages and the way we did that was to make a ply box which was returned after the customer had received their item, there was a surcharge which was refunded on receipt of the box back to us in useable condition , saved a lot on time/ expence making them and the customer ultimately didn't pay for the box (he did pay to return the box)
__________________
remember we are not mad just creatively insane
Reply With Quote
  #8  
Old 20th January 2016, 03:55 PM
garyt garyt is offline
Senior Member
 
Join Date: Jun 2014
Location: Dufftown, scotland
Posts: 480
Default

some options to consider re screen supports
mirror attachment points ... or not
door / wind deflector attachment points... or not
strength as there is a fair bit of force hitting the screen
body attachment etc.
Im sure you have considered these points, just stuck at home today and throwing it out to you, don't mean to offend..
Heaven knows we need people to explore , develop , supply things to benefit those of us who cant.
Keep up the good work
__________________
remember we are not mad just creatively insane
Reply With Quote
  #9  
Old 20th January 2016, 09:47 PM
SeriesLandy's Avatar
SeriesLandy SeriesLandy is offline
Senior Member
 
Join Date: Nov 2008
Location: Portsmouth
Posts: 828
Default

I'll be keeping my eye on this, I want a windscreen to make my car a bit more useable.
__________________
Steve
My Photo Album | Haynes Roadster FAQ | IVA Forms How To
Reply With Quote
  #10  
Old 20th January 2016, 11:56 PM
Ianr Ianr is offline
Senior Member
 
Join Date: Sep 2014
Posts: 249
Default

Quote:
Originally Posted by SeriesLandy View Post
I'll be keeping my eye on this, I want a windscreen to make my car a bit more useable.
And me, I want one too
__________________
My build blog here http://ianhaynes20.wordpress.com
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 06:40 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.