Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > Bodywork and interior
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 30th July 2015, 08:29 PM
alga's Avatar
alga alga is offline
Senior Member
 
Join Date: Feb 2009
Location: Vilnius, Lithuania
Posts: 1,249
Default Vinyl wrap

Hi. Since my GRP parts were in a sorry state, I decided to fix the crumbled gel coat with body filler and cover the body in vinyl. I went for the premium film, Arlon Ultimate Premium Plus in Hornet Metallic. It's an air release film that has a microscopic pattern on the glue that allows to squeeze the air out of trapped bubbles. 7x1.5m were enough to cover the nose, bonnet, scuttle, wings and arches.

I botched one 1m length while doing the bonnet. The glue is meant for auto paint, it sticks too well to aluminium and I managed to delaminate the gold layer of the film from the clear when peeling the film from the bonnet. Also I burned through the film with a heat gun in a couple of places. I just cut out the damaged area and stuck a patch on top. It's not pretty up close, but does not stand out.

The film is not completely opaque, there's a subtle colour difference between the bonnet, where there's alluminium beneath the film and nose/scuttle. Some of my fixes have the original yellow gel coat, clear resin on the repaired areas and white body filler, and all these shine through. So for the remaining parts I sprayed the repair with a nearly matching colour before wrapping.


The manufacturers of the films provide plenty of instructional material online, e.g. http://www.wrapitright.com/

In retrospect, it was a pretty time consuming job. A rear arch is about 2h, the nose about 4h of work, so in total it took about 20 h. It's pretty hard to wrap complex shapes without any defects, I left some minor wrinkes on the sides of the nose cone, also, caught some debris beneath the film in some places. Despite that, the general look is pretty good.

https://goo.gl/photos/TTTSTUTbMcmbWViA8
__________________
Albert
Haynes Roadster FAQ | Haynes Builder Locations
Gallery, build thread in Lithuanian / via Google Translate.
Reply With Quote
  #2  
Old 30th July 2015, 08:48 PM
alga's Avatar
alga alga is offline
Senior Member
 
Join Date: Feb 2009
Location: Vilnius, Lithuania
Posts: 1,249
Default

Oh, I forgot to mention that the film cost about €180.
__________________
Albert
Haynes Roadster FAQ | Haynes Builder Locations
Gallery, build thread in Lithuanian / via Google Translate.
Reply With Quote
  #3  
Old 31st July 2015, 12:17 PM
flyerncle flyerncle is offline
Senior Member
 
Join Date: Mar 2008
Location: gateshead,near cobbly bit of A1 North
Posts: 3,188
Default

Wrapped my rear panel (no jokes please) proper nightmare to get right.
__________________
Cost : Little as possible.
Thanks : To those who by their generosity my build has progressed.
Its a handmade sports car not a flaming kit car !!!


If at first you dont succeed,avoid skydiving...

No parachute require to freefall,only if you want to do it twice.
Reply With Quote
  #4  
Old 31st July 2015, 12:20 PM
NeilW NeilW is offline
Senior Member
 
Join Date: Jun 2014
Location: Sunderland, Tyne and Wear
Posts: 224
Default

Never tried wrapping panels on a car, I did once try window tints - was a nightmare (scratches, dust, bubbles) ended up doing them in the bath!
__________________
Total Spent so far - £xxxxx
Last Purchase - Engine mounts, steering wheel, slave cylinder.
Reply With Quote
  #5  
Old 1st August 2015, 01:26 PM
voucht's Avatar
voucht voucht is offline
Senior Member
 
Join Date: Jun 2011
Location: Lautrec, Tarn (81), Occitanie, France
Posts: 879
Default

I tried to wrap my GBS aero-screen, a pure nightmare going over all the curves. Made 3 attempts, and finally gave up and took the aero-screen to a paint shop. The result is much better
Reply With Quote
  #6  
Old 1st August 2015, 02:07 PM
norton norton is offline
Senior Member
 
Join Date: May 2015
Posts: 434
Default

Are you using a lubricant (washing up liquid & water) to assist? Many wraps say they have channels in them to get air out, which they do but a bit of liquid helps a lot.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 10:38 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.