Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > Electrics
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Thread Tools Display Modes
Old 31st March 2015, 08:14 PM
james3004's Avatar
james3004 james3004 is offline
Senior Member
Join Date: Oct 2007
Location: Haddenham, Cambridge
Posts: 479
Default Cycle wing Side Repeater Wiring

I am going to put side repeaters on my cycle wings, has anyone done this and what is the best way to route the wiring?
--- James ---

IVA passed 20 June 2017
Flickr Album
Reply With Quote
Old 31st March 2015, 08:39 PM
davedew's Avatar
davedew davedew is offline
Senior Member
Join Date: Jul 2010
Location: Taunton
Posts: 342

I did this on mine.
Wires along the rear of the lower wishbone. Then a bit of a loop at the bottom ball then up the cycle wing stay


OTR 01/05/14 - 1.6 CVH, Type 9, Bike Carbs, Megajolt

Last edited by davedew : 31st March 2015 at 08:53 PM.
Reply With Quote
Old 31st March 2015, 08:40 PM
CTWV50's Avatar
CTWV50 CTWV50 is offline
Senior Member
Join Date: Aug 2010
Posts: 1,297

I routed mine from under the front of the nose cone along the front of the upper wishbone in conduit, where it then can be neatly zip tied to the cycle wing supports. Don't forget a grommet or silicone to protect the wiring as it passes through the cycle wing. Mine where mounted on the rear of the cycle wings to conform with the required viewing angles.
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

All times are GMT +1. The time now is 10:53 AM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.