Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > Announcements
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #11  
Old 12th January 2014, 11:16 PM
voucht's Avatar
voucht voucht is offline
Senior Member
 
Join Date: Jun 2011
Location: Lautrec, Tarn (81), Occitanie, France
Posts: 879
Default

Quote:
Originally Posted by Numplumb View Post
Hi skov did you use the mx5 master cylinder?.
I have seen 3/16" pipe with 10mmx1mm fittings on EBay but I don't think the connections to the master cylinder are Metric, one of the connections says 1/8 something can't read it properly.

Regards Mick.
I would be very surprised that all the connections are not metric on the MX5

I just double checked in the data bases I have for brake lines and in-board brake pipes : everything is always metric M10x1.00 all around on all Mazda (except in the 70's, some models use M10x1.25, but it is not your concern )

The 1/8 thingy you saw can be either 1/8x28 BSP (parallel thread) or 1/8x27 NPT, (tapered thread). In both case, "1/8" has nothing to do with the diameter of the thread in inches, it is just an appellation (1/8 BSP is 9.73mm out. diam. on the male part, and 1/8 NPT is 10.29mm)

But again, I would be extremely surprised that one of these 2 threads has been used on the MX5!

You can start by carefully checking the diameters of the ports of your M/C. Here are some useful data's:
M10x100: male OD = 10mm, female ID = 9mm, 10 threads on 10mm
1/8 BSP: male OD : 9.73mm, female ID = 8.56mm, 28 threads per inch
1/8 NPT (tapered) male OD (middle of the threaded part)=10.29mm, female ID=8,41mm, 27 threads per inch.

If you find a port which is not M10x1.00 on the MX5 brake circuit, I would be very interested to know where, and what thread it is please

Thanks, and good luck
Reply With Quote
  #12  
Old 13th January 2014, 12:18 PM
flyerncle flyerncle is offline
Senior Member
 
Join Date: Mar 2008
Location: gateshead,near cobbly bit of A1 North
Posts: 3,188
Default

Sometimes jap pipe ends do not have the small unthreaded portion at the end of the fitting so the normal 10x1 mm will not seat properly and some have OP 2 concave on the pipe just to confuse the issue a little more
__________________
Cost : Little as possible.
Thanks : To those who by their generosity my build has progressed.
Its a handmade sports car not a flaming kit car !!!


If at first you dont succeed,avoid skydiving...

No parachute require to freefall,only if you want to do it twice.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 04:43 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.