![]() |
#1
|
|||
|
|||
![]() Hi there, what have you guys done re covering the front camber adjust nut for the IVA test? I can't find anything that I think the inspector will be happy with
![]() Any ideas welcome. Enoch |
#2
|
|||
|
|||
![]() |
#3
|
||||
|
||||
![]() Some large diameter cable heat shrink should do fine Dave
__________________
Haynes Roadster / Saturn GRP Bodywork. Now available direct through http://www.gillhamonline.co.uk/ or contact me direct on andrew.hugill@ntlworld.com Regards..........AndyH |
#4
|
||||
|
||||
![]() Quote:
http://www.audiospares.com/product.p...2&cat=0&page=1 AndyH
__________________
Haynes Roadster / Saturn GRP Bodywork. Now available direct through http://www.gillhamonline.co.uk/ or contact me direct on andrew.hugill@ntlworld.com Regards..........AndyH |
#5
|
|||
|
|||
![]() Thanks Spud, I thought Ash found out that heatshrink was not permitted any more?
I am thinking of speaking to my local test station and asking a few direct questions to try and elliminate some of the variances. Thanks again, Enoch |
#6
|
||||
|
||||
![]() I think Ash just had a very pedantic tester, as far as i'm aware heat shrink is fine but if you're not sure cable glands can be used just need to get the correct size.
AndyH
__________________
Haynes Roadster / Saturn GRP Bodywork. Now available direct through http://www.gillhamonline.co.uk/ or contact me direct on andrew.hugill@ntlworld.com Regards..........AndyH |
#7
|
|||
|
|||
![]() Thanks again Andy. I think I will try to speak to the IVA centre and see if they are equally pedantic when the build is not being covered by a national magazine
![]() Best and all that. Enoch |
#8
|
|||
|
|||
![]() Spud69
Jumped in without reading properly, have since read and realised my mistake. Cheers |
![]() |
Thread Tools | |
Display Modes | |
|
|