|
|
|
|
#2
27th November 2011, 10:16 PM
|
|||
|
|||
I got the ones (size recommended by saturn) for my floor and they were from screwfix and worked out really cheap. about £5 for 500
__________________
Click to see my build photos on Flikr http://www.flickr.com/photos/67112582@N03/ Saturn MX5 Based Chassis, Limited Slip Diff & 2.4 Quick Rack. Build cost.... seems to be spending more on tools than car bits at the moment! (they will be handy in the future though). Car iva'd and passed 15/08/2014. Finished weight 572kg. 
|
|
#3
28th November 2011, 04:48 PM
|
|||
|
|||
rivets
Hi Ken, I'll echo that, Screwfix Item code: 14233 Pop Rivet 3.2 x 10 - Pack of 500 for £ 5.28. After Boyes' el cheapo riveter fell to bits half way through rivetting, I bought the forged steel one from Screwfix, hell of a lot better. Dave.
|
|
#4
28th November 2011, 06:17 PM
|
|||
|
|||
|
mmmm iv been researching this quite a bit between here and locostbuilders.
and i came to the conclusion closed end, alloy rivets were the way to go  Bonzo's link http://www.shop4fasteners.co.uk/acat...d_Rivets.as p about £25 delivered though, a bit more expensive. what do other peepe think?
|
|
#5
28th November 2011, 06:29 PM
|
||||
|
||||
|
Sealed rivets would be my personal choice.
Perhaps a couple of builders could get together & split a box 
__________________
I am not a complete idiot...........Some of the parts are missing !! Ronnie  www.roadster-builders.co.uk
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
