Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > Engine/transmission
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 21st February 2019, 09:38 PM
JeanP JeanP is offline
Junior Member
 
Join Date: Sep 2017
Posts: 5
Default Swap Focus ST 170

Hi Everybody!
I introduce myself: Jean , french from St Etienne, I started building a roadster Haynes with the books of Chris Gibbs two years ago.
Now, the car is finished with a 1.8 sohc engine from aSierra and a T9 gearbox.

Recently, I have bought a st170 bloc , and I hope swap this engine instead of the 1.8 ( I hope you follow me, because my english is not very well)

Now, I am looking for links or blogs or pictures, that show how the engine and its accessories are mounted.
Thank you in advance for your many answers!
Cheers
Jean
Reply With Quote
  #2  
Old 22nd February 2019, 09:21 AM
jps jps is offline
Senior Member
 
Join Date: May 2012
Location: Colchester, Essex
Posts: 439
Default

I'm afraid I can't help from personal experience but I just spotted this on Locostbuilders which may be of use to you?

http://locostbuilders.co.uk/viewthread.php?tid=190440
Reply With Quote
  #3  
Old 22nd February 2019, 06:41 PM
JeanP JeanP is offline
Junior Member
 
Join Date: Sep 2017
Posts: 5
Default

Thank you for this start JPS

Other participations are welcome!!!
cheers
Jean
Reply With Quote
  #4  
Old 27th February 2019, 07:50 PM
twinturbo's Avatar
twinturbo twinturbo is offline
Super Moderator
 
Join Date: Jul 2008
Location: Carlisle
Posts: 4,389
Default

which SOC engine do you have, the PINTO or the CVH?

The CVH woul dgive you the correct sump and oil pickup for the Zetec.
__________________
You only get a woosh with a dump valve

Build Thread


Man Cave Mantiques



Cecil Street Auto Repairs Garage Carlisle




Build Cost £4181.65 - Last - Wheel Cylinders
Reply With Quote
  #5  
Old 1st March 2019, 08:16 PM
JeanP JeanP is offline
Junior Member
 
Join Date: Sep 2017
Posts: 5
Default

Hi everybody!
Sorry for the long time before my response Twinturbo!
Well, I think it's a cvh but I'm not sure
If somebody knows where I can find a workshop manual about this engine,
please tell me
Cheers
Jean
Reply With Quote
  #6  
Old 1st March 2019, 08:22 PM
twinturbo's Avatar
twinturbo twinturbo is offline
Super Moderator
 
Join Date: Jul 2008
Location: Carlisle
Posts: 4,389
Default

which side is the carburettor on (from front) left or right?

TT
__________________
You only get a woosh with a dump valve

Build Thread


Man Cave Mantiques



Cecil Street Auto Repairs Garage Carlisle




Build Cost £4181.65 - Last - Wheel Cylinders
Reply With Quote
  #7  
Old 1st March 2019, 09:22 PM
JeanP JeanP is offline
Junior Member
 
Join Date: Sep 2017
Posts: 5
Default

Hi!
When you are in front of the car, tle carburettor is on the right, it's a Pierburg
Reply With Quote
  #8  
Old 1st March 2019, 10:28 PM
twinturbo's Avatar
twinturbo twinturbo is offline
Super Moderator
 
Join Date: Jul 2008
Location: Carlisle
Posts: 4,389
Default

If it's on the right then it's a 1.8 Pinto ( both CVH and Pinto use the Pierburg 2E3)

Unfortunately the Pinto sump and oil pickup are of no use on a Zetec conversion.

TT
__________________
You only get a woosh with a dump valve

Build Thread


Man Cave Mantiques



Cecil Street Auto Repairs Garage Carlisle




Build Cost £4181.65 - Last - Wheel Cylinders
Reply With Quote
  #9  
Old 2nd March 2019, 06:24 PM
robj robj is offline
Member
 
Join Date: Mar 2010
Posts: 86
Default

Hi Jean I'm currently in the process of fitting an ST170 to my roadster I'm still figuring stuff out and making what I can. I made my own sump out of sheet metal as the original was a bit to rusty to be modified. Here's some images of what I've done so far.



I used the original oil pickup pipe I just cut it down in height to it the new profile of the sump.
Reply With Quote
  #10  
Old 2nd March 2019, 06:49 PM
robj robj is offline
Member
 
Join Date: Mar 2010
Posts: 86
Default

Ive also done a little bit of research I think to get the engine to work with the type 9 gearbox you will need to use a flywheel of a 1.8 zetec redrilled to take a pinto clutch. You can get them from retro ford in the uk. You will need to add an extra pulley as well to make the water pump run the right way after you've removed the power steering pump and aircon. I'm going to run throttle bodies on mine so I've got myself an me221 ecu from motorsport electronics. Hope fully as plug and play as they say.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 05:37 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.