#1
|
||||
|
||||
Steel CVH Sump to good home
Recently taken off a modified steel sump from a 1.8cvh which was upgraded to a new ali one. Sump is free to a good home, P&P £15, if anybody genuinely needs one.
The sump includes pick up pipe but will need a new gasket, will not be upto track or hard driving but will be fine for general use or just to get a cvh car through IVA prior to upgrading. Let me Know....Andrew
__________________
Haynes Roadster / Saturn GRP Bodywork. Now available direct through http://www.gillhamonline.co.uk/ or contact me direct on andrew.hugill@ntlworld.com Regards..........AndyH |
#2
|
||||
|
||||
WoW
Thats a great help to a forum member needing one of these, especially as its already been shortened & ready for installing into the Roadster chassis, they are becoming hard to find .......& expensive when you do Nice gesture Spud, thats what this forum is all about, helping fellow builders Ps....isn,t it about time you treated yourself to some new shocks ? (only kidding ) cheers andy
__________________
Flat Pack Chassis Kits for sale, contact me at andyroadster@yahoo.co.uk |
#3
|
||||
|
||||
Quote:
Only use Protech - they are the best for the money Andrew
__________________
Haynes Roadster / Saturn GRP Bodywork. Now available direct through http://www.gillhamonline.co.uk/ or contact me direct on andrew.hugill@ntlworld.com Regards..........AndyH |
#4
|
|||
|
|||
Quote:
he had bought loads of sets and didnt get any backup alot of people b1tch about gaz ones but i find this odd as thay seem to be fitted to tons of kits as std fitment so thay cant be that bad i would like spax or avo coilovers but you cant get them for good money so im going for gaz |
#5
|
|||
|
|||
Hi There,
Someone said to me that the 1.8 CVH sump would fit to the 2 litre zetec .... is this true? If so I would be very interested in the sump and can send money via bank transfer Cheers, Jonathan |
#6
|
|||
|
|||
nice jesture with the sump btw spud
|
#7
|
||||
|
||||
I've found them great so far Baz, and Kevin at Protech has always been okay. We can only go by our own experiences.... , sump was foc of a car anyway so it may aswell go to a good home.
btw, yes the 1.8cvh does fit the 2l zetec. The zetec bolt pattern doesn't have the 6mm holes at each end and you need to extend the holes in the cvh sump slightly of the sump as the cvh but if you are careful and use some sealer it is okay. Andrew
__________________
Haynes Roadster / Saturn GRP Bodywork. Now available direct through http://www.gillhamonline.co.uk/ or contact me direct on andrew.hugill@ntlworld.com Regards..........AndyH Last edited by spud69 : 27th January 2011 at 03:39 PM. |
#8
|
|||
|
|||
Thing is with these shocks is they nearly all share the same internals......why you ask? Because it goes back to Spax and folk working,learning then leaving and setting up on their own....I know of at least 3 firms
If you want decent shocks that work and last then Spax or Koni.....yep the expensive ones |
#9
|
|||
|
|||
Pm sent spud
Cheers Russ |
#10
|
|||
|
|||
hi
if sump is still available, i will take it. tried to buy baz r`s (i think) when he swopped his engine but missed out. thanks steve |
Thread Tools | |
Display Modes | |
|
|