Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > Running gear
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 17th November 2014, 07:30 PM
Rosco Rosco is offline
Senior Member
 
Join Date: Sep 2014
Posts: 493
Default Rear upright holes x 2

Right, I've done a seach and found a few similar threads but not really found an answer for both of my problems

Problem 1

I have made the rear upright as in the book with the tube for the rear wishbone bolt 62mm up from the jig, then once I was ready to tack the rear upright I double checked the hole for the shock as in fig 5.24, it says 66mm but it is 70mm and 70mm back works correct to the 62mm if you trig out the dimension of RU2

Hope this makes sence



Problem 2

There's loads of threads about rotating RU8 to suit disc brakes better but all the threads are old and the pictures are missing, can anyone help me out??
Reply With Quote
  #2  
Old 17th November 2014, 09:47 PM
voucht's Avatar
voucht voucht is offline
Senior Member
 
Join Date: Jun 2011
Location: Lautrec, Tarn (81), Occitanie, France
Posts: 879
Default

Hi,
I can't help for problem 1 as I haven't done my rear uprights myself but bought them from Talonmotorsport.

Regarding problem 2, the book, page 72, says how tu place RU8 according to disc or drum set-up.

However, Talonmotorsport's uprights are designed to fit both disc and drum set-ups, as you can see on the following pictures of my car.

2013-10-17_12-58-32 by Voucht71, on Flickr

2013-10-17_17-10-06 by Voucht71, on Flickr

2013-11-24_15-11-40 by Voucht71, on Flickr


For drum set-up, this design also allows you to use flexi brake lines going directly into the drum cylinder with a straight male fitting, and not the copper pipe thingy explained in the book.

Hope this will help

Are you going for rear disc or rear drum set-up?

Last edited by voucht : 17th November 2014 at 09:51 PM.
Reply With Quote
  #3  
Old 17th November 2014, 10:19 PM
Rosco Rosco is offline
Senior Member
 
Join Date: Sep 2014
Posts: 493
Default

Yeah im going disc, i think rotating like that also helps with disc handbrake cable from what i can work out

Does anyone have a picture of a rotated upright with a caliper fitted?
Reply With Quote
  #4  
Old 18th November 2014, 10:28 PM
Rosco Rosco is offline
Senior Member
 
Join Date: Sep 2014
Posts: 493
Default

Well I've tacked them up like this, looks right to me, anyone else pass judgment?



Passenger side and drivers side



And the hubs will bolt on like so
Reply With Quote
  #5  
Old 19th November 2014, 04:21 PM
TalonMotorFabrication TalonMotorFabrication is offline
Senior Member
 
Join Date: Jun 2011
Location: Southminster Essex
Posts: 260
Default

You may want to go and get the whole caliper assembly and offer it up to the upright before you go any further, if you weld it fully and it's wrong it's a royal pain in the arse to fix.
__________________
Unofficially rated No.1 supplier of fabricated Haynes Roadster parts by the workshop rat population.

Direct email talonmotorfabrication@gmail.com

Last edited by TalonMotorFabrication : 19th November 2014 at 04:25 PM.
Reply With Quote
  #6  
Old 19th November 2014, 06:57 PM
Rosco Rosco is offline
Senior Member
 
Join Date: Sep 2014
Posts: 493
Default

Quote:
Originally Posted by TalonMotorFabrication View Post
You may want to go and get the whole caliper assembly and offer it up to the upright before you go any further, if you weld it fully and it's wrong it's a royal pain in the arse to fix.
Haha, i have done, are you saying they look wrong?
Reply With Quote
  #7  
Old 19th November 2014, 07:54 PM
flyerncle flyerncle is offline
Senior Member
 
Join Date: Mar 2008
Location: gateshead,near cobbly bit of A1 North
Posts: 3,188
Default

The book was wrong if I remember correctly with regard to drum and disc in the drawings.
You may find you cant get the caliper etc on as you have it when fitted to the suspension,as Phil said royal PITA to fettle.
The drum set up will fit with cylinder upright as it is fitted to all the Sierras that had drums on.
__________________
Cost : Little as possible.
Thanks : To those who by their generosity my build has progressed.
Its a handmade sports car not a flaming kit car !!!


If at first you dont succeed,avoid skydiving...

No parachute require to freefall,only if you want to do it twice.
Reply With Quote
  #8  
Old 2nd December 2014, 10:18 PM
Rosco Rosco is offline
Senior Member
 
Join Date: Sep 2014
Posts: 493
Default

Can anybody help on my first issue? It's as if the book contradicts itself
Reply With Quote
  #9  
Old 13th January 2016, 05:20 PM
Ricky Ricky is offline
Senior Member
 
Join Date: Oct 2009
Location: johannesburg south africa
Posts: 262
Default

Hi has anyone figured the problem with that measurement on the upright that says 66 in the book but is showing 70 when you measure it has anyone perhaps know if 66 is wrong and 70 is right please? Thank you
Reply With Quote
  #10  
Old 13th January 2016, 09:34 PM
mopple mopple is offline
Member
 
Join Date: Apr 2009
Location: Estonia
Posts: 59
Default

Hi Ross,

According my CAD model the upper bone hole is 58 mm from the RU5 tube or jig surface and all other dimension match with book diagrams within a few tenths of a mm. Here's a screenshot https://onedrive.live.com/redir?resi...nt=photo%2cJPG.

Regards
Madis
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 03:32 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.