|
#1
|
||||
|
||||
Brake pedal
Another probably obvious stupid question but what stops the brake pedal from flopping forwards?
if i rest it on the floor its too far foward, whats the reason for not having a support like the throttle and clutch? Am i missing something? :S
__________________
~ My Build Diary - http://davesroadster.blogspot.com/ *updated 7/6/11* Best bit so far: Getting it running Worst bit so far: Cutting steel for wishbones and engine mounts. Most annoying bit so far: Generator packing up half way through welding. |
#2
|
||||
|
||||
There's a limiting bolt that should be sticking out of the floor, supporting the brake pedal by a protrusion on its front face.
__________________
Albert Haynes Roadster FAQ | Haynes Builder Locations Gallery, build thread in Lithuanian / via Google Translate. |
#3
|
|||
|
|||
on the book pedals there is a tab that sticks out of the front of the pedal at the bottom.
put a bolt threw the floor (with a nut on either side) to line up with this tab then you have an adjustable stop tilly Last edited by Tilly819 : 4th December 2010 at 04:24 PM. Reason: spelling |
#4
|
|||
|
|||
must learn to type faster
beet me to it tilly |
#5
|
||||
|
||||
Ah ha. Makes sense now cheers. I was going to put something underneath there as a stopper, never thought of making it adjustable.
Where would I be without you guys. Another job for tomorrow.
__________________
~ My Build Diary - http://davesroadster.blogspot.com/ *updated 7/6/11* Best bit so far: Getting it running Worst bit so far: Cutting steel for wishbones and engine mounts. Most annoying bit so far: Generator packing up half way through welding. |
#6
|
|||
|
|||
Mine's got the standard Sierra pedal box, and the brake switch (bayonet fit into the top of the pedal box) stops the pedal dropping right back.
|
Thread Tools | |
Display Modes | |
|
|