|
|
#1
4th November 2009, 07:13 AM
|
||||
|
||||
Engine Stand
I'm thinking about buying an engine stand now that i have the finances to buy one, but i have 1 question first.
Can you just put a block on an engine stand without the head etc? As all i am really wanting the stand for is to more easily clean/paint the engine and then aid in reassembly when i get to that stage. Cheers
__________________
1.8 Silvertop Zetec (ZX6R Carbs + Megajolt) + Type 9 My Build Blog: http://www.haynes.co.uk/forums/showthread.php?t=2736 - Last Update: 31st October 2020 Total Spent so far: Stopped counting 
|
|
#2
4th November 2009, 07:31 AM
|
||||
|
||||
|
engine stands are pretty universal in the way they hold an engine, they have a sliding bolt arrangement to allow different engines to fit on the stand so basically if you have 4 mounting points ( holes in the block ) to attach to then don,t see why it wouldn,t work, they certainly help when you start putting it back together
 .cheers andy
|
|
#3
4th November 2009, 07:32 AM
|
||||
|
||||
|
Cheers for that Andy. Do you know if the cvh engine does?
 I can't be bothered to venture out into the garage to find out 
__________________
1.8 Silvertop Zetec (ZX6R Carbs + Megajolt) + Type 9 My Build Blog: http://www.haynes.co.uk/forums/showthread.php?t=2736 - Last Update: 31st October 2020 Total Spent so far: Stopped counting
|
|
#4
4th November 2009, 07:42 AM
|
||||
|
||||
|
Quote:
erm yes it does, i used the bolt holes from where the bellhousing attaches to the engine block, it takes a little jiggery pokery to find the balance point but once done its a piece of cake cheers andy
|
|
#5
4th November 2009, 08:29 AM
|
||||
|
||||
|
Tatey - have a look in the pics in my signature and you will see how I've got my Pinto on an engine stand.
Cheers Dave
__________________
Gallery 2 http://www.facebook.com/album.php?ai...4&l=a9831a9319 Gallery 3 http://www.facebook.com/album.php?ai...4&l=3f0d42c523 Gallery 4 http://www.facebook.com/album.php?ai...4&l=efb083b7df Gallery 5 http://www.facebook.com/media/set/?set=a.10150244028550325.366987.601005324&l=583fd5 cd3a Gallery 6 http://www.facebook.com/media/set/?set=a.10150550640070325.430417.601005324&type=1&l =fe779b358c
|
|
#6
4th November 2009, 05:45 PM
|
|||
|
|||
|
Just bought one from Machine Mart for the garage £60 ish for the bigger one and as Andy say's just bolt through block holes,you may need some longer bolts.
pop in and have a look if you want.
|
|
#7
4th November 2009, 05:49 PM
|
||||
|
||||
|
Would i be able to come in tomorrow to have a look? Also.....would i be able to bring my head and crank down, as i gave the spark plug method a go last week but i didn't manage to get the retainers out, im guessing there is a nack to it? and i'm still having difficulties getting the camshaft pulley and crankshaft pulley's off.
__________________
1.8 Silvertop Zetec (ZX6R Carbs + Megajolt) + Type 9 My Build Blog: http://www.haynes.co.uk/forums/showthread.php?t=2736 - Last Update: 31st October 2020 Total Spent so far: Stopped counting
|
|
#9
4th November 2009, 05:57 PM
|
||||
|
||||
|
I should be there around 5.15-5.30 if that's all right? If not i'll happily come on a different day.
__________________
1.8 Silvertop Zetec (ZX6R Carbs + Megajolt) + Type 9 My Build Blog: http://www.haynes.co.uk/forums/showthread.php?t=2736 - Last Update: 31st October 2020 Total Spent so far: Stopped counting
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
