|
#1
|
|||
|
|||
transit drag ends
setting the wishbones up and pu in the drag ends great
put on the sierra hub front put in the alloy mushrooms pushed in the drag ends BUT VERY LITTLE THREAD COMING THROUGH THE MUSHROOM can anyone tell me what is wrong: |
#2
|
|||
|
|||
Probably the hole in the mushrooms for the drag link is not big enough. It should be tapered and of a size so that when the drag link nut is done up hard a couple of threads show past the lock nut. The other possibility is that the top part of the mushrooms are too thick. You need to get your vernier out and check the dimensions. Check the diameter of the drag link taper and compare it to the size of your hole first.
Enoch. |
#3
|
|||
|
|||
Mine was the same
I guessing that there must be two differing lengths of thread on the drag links depending where they come from My mushrooms were from 3GE and i had to get them reamed out a little to ensure the thread was through the nyloc nut with a few threads extra But many others have used 3GE mushrooms with no problems So you either need to get some drag links with a longer thread or modify the mushrooms to suit |
#4
|
|||
|
|||
that sorts the problem i will get the mushrooms modified to suit the ends
hey many thanks to all |
#5
|
||||
|
||||
Sounds like you are really cracking on with your build
cheers andy |
#6
|
|||
|
|||
hi andy
the frame all done the diff is in the rear hubs are on on to the front and then the steering rack not correct and some other probs but were getting there should be ready for 2020 with any luck |
#7
|
||||
|
||||
Depending how much it is you could grind a bit off the bottom of the mushroom to allow more thread to stick through.
|
#8
|
||||
|
||||
Quote:
re...problems.....they are the fun/challenge of each individual build, a great feeling when you "resolve" the problem cheers andy |
Thread Tools | |
Display Modes | |
|
|