#1
|
||||
|
||||
It's getting there - Rx-8 based roadster
Well its getting there, haven't had much time over the last month to get on with it but once i've decided on the rear hubs it will be rolling. Can get on with the braking system, hydraulic clutch, cooling and exhaust. Electrics last since this will be the biggest headache, rest should be pretty straight forward. Not sure where to get the bodywork from though.....
Quite pleased with it so far, engine fits a treat and will just fit under the bonnet once i've removed most of the intake gubbins. I've attached some pics so pleasant looking........AndyH
__________________
Haynes Roadster / Saturn GRP Bodywork. Now available direct through http://www.gillhamonline.co.uk/ or contact me direct on andrew.hugill@ntlworld.com Regards..........AndyH |
#2
|
||||
|
||||
Fantastic stuff there Andy
You look to be making good progress with that project
Going to be awesome when completed, I am a very big fan of the RX8 engine Sure some bodywork will turn up from somewhere .... Might be a good excuse for a bonnet with a full length power bulge
__________________
I am not a complete idiot...........Some of the parts are missing !! Ronnie www.roadster-builders.co.uk |
#3
|
|||
|
|||
Very nice good to see more engine options
What sort of power will you get out of that ?
__________________
AJ'S Build |
#4
|
||||
|
||||
Quote:
You can get 260hp from a remapped stock wankel engine but going for a conservative 240hp giving an ass kicking 460bhp / tonne - hence the RW460. Want it to be on the road by the new year, pro-plus ordered.... Cheers....AndyH
__________________
Haynes Roadster / Saturn GRP Bodywork. Now available direct through http://www.gillhamonline.co.uk/ or contact me direct on andrew.hugill@ntlworld.com Regards..........AndyH |
#5
|
|||
|
|||
Have you made any mods to the chassis to take this sort of power I thought the chassis was only able of around 200bhp before it starts to twist?
__________________
AJ'S Build |
#6
|
||||
|
||||
Its got some extra cross bracing in Andy but also is made completely out of 2mm thick box section rather than 1.6mm. The 2mm box gives a lot stronger and rigid chassis and a lot better, stronger, welds.
You are correct about the Haynes chassis but this is more of a disclaimer for Haynes and when you compare the chassis to other cars taking similar power the Haynes design is as good as if not better than these. Cheers.....AndyH
__________________
Haynes Roadster / Saturn GRP Bodywork. Now available direct through http://www.gillhamonline.co.uk/ or contact me direct on andrew.hugill@ntlworld.com Regards..........AndyH |
#7
|
||||
|
||||
I expect you'll have some dopey old fossil from the far West of Cornwall wanting to visit Saturn for a ride once it is on the road
Better still, visit one of Saturn's track days
__________________
I am not a complete idiot...........Some of the parts are missing !! Ronnie www.roadster-builders.co.uk |
#8
|
||||
|
||||
Be good for me and Handy to see you again Ronnie, don't worry though we've had plenty of dopey old fossils here over the year.....
Cheers....AndyH
__________________
Haynes Roadster / Saturn GRP Bodywork. Now available direct through http://www.gillhamonline.co.uk/ or contact me direct on andrew.hugill@ntlworld.com Regards..........AndyH |
#9
|
||||
|
||||
That looks good Andy,
I will be over for a demo ride w2hen it's legal TT
__________________
You only get a woosh with a dump valve Build Thread Man Cave Mantiques Cecil Street Auto Repairs Garage Carlisle Build Cost £4181.65 - Last - Wheel Cylinders |
#10
|
||||
|
||||
Quote:
The RX8 is looking great in the Roadster chassis, can,t wait to get it on the track cheers andy |
Thread Tools | |
Display Modes | |
|
|