Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > General discussion
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 26th October 2014, 07:13 PM
Rosco Rosco is offline
Senior Member
 
Join Date: Sep 2014
Posts: 493
Default Rosco's haynes Build "Warhawk"

Started my build last weekend, with the help of my Dad, just thought I would start a thread to share with you guys and get a few pointers along the way

A bit of background info, I'm 28, and a cnc miller by trade and my dads a carpenter so between us we get on with things ok, I've always loved cars and always wanted to build a kit car, I'm going down the bike engine route in a bare bones track chassis no luxury much to my dads disappointment, I'm going to work to the book and get it on the road as soon as I can, funds permitting, and then after that I will start replacing the uprights for cnc aluminium ones etc, but if I start doing those things now I will never get finished

First I got some sierra bits from a breakers yard for a bargain price,



I have stripped the hubs and they are at the blasters as we speak

Material ready to get started



Next we built a build table, we used a sheet of ply for the frame, and a sheet for the top


Last edited by Rosco : 30th January 2016 at 08:14 PM.
Reply With Quote
  #2  
Old 26th October 2014, 07:14 PM
Rosco Rosco is offline
Senior Member
 
Join Date: Sep 2014
Posts: 493
Default

Then got things marked out and started cutting







Front frame done

Reply With Quote
  #3  
Old 26th October 2014, 07:15 PM
Rosco Rosco is offline
Senior Member
 
Join Date: Sep 2014
Posts: 493
Default

I was surprised how quick it started to take shape considering we cut the box as we went along







Reply With Quote
  #4  
Old 26th October 2014, 07:15 PM
Rosco Rosco is offline
Senior Member
 
Join Date: Sep 2014
Posts: 493
Default



Next up the tunnel and cross braces



Then the diff cage

Reply With Quote
  #5  
Old 26th October 2014, 07:16 PM
Rosco Rosco is offline
Senior Member
 
Join Date: Sep 2014
Posts: 493
Default

Got my roll bar bent up yesterday by Tom at www.tube-bender.co.uk, not to far from my house, bent out of 2" cds tube, well pleased with it,
I'm aiming to meet msa spec but not sure if the rear stays can be angled out, I'm going for a full cage but just got the rear hoop until I get my
Scuttle mounted and see what room I've got

It's only clamped on for now as I've got to finish drawing up my parts for laser cutting this week hopefully





And that's about where I'm up to

Thanks for looking
Reply With Quote
  #6  
Old 26th October 2014, 07:56 PM
garyt garyt is offline
Senior Member
 
Join Date: Jun 2014
Location: Dufftown, scotland
Posts: 480
Default

welcome and that's some progress in a week ! there are plenty of helpful minds on here so don't be afraid to ask. if need be.
what engine are you using?
good luck with the build and keep the photos coming
regards gary
Reply With Quote
  #7  
Old 26th October 2014, 08:34 PM
Rosco Rosco is offline
Senior Member
 
Join Date: Sep 2014
Posts: 493
Default

Haha cheers, it has been two weekends! Not sure on engine yet, either an r1 or zx10 I think, I've not really looked into the engine to much, I'm going to get the wishbones made next and try and get some wheels on it
Reply With Quote
  #8  
Old 26th October 2014, 09:11 PM
thailoz thailoz is offline
Senior Member
 
Join Date: Mar 2013
Location: Thailand
Posts: 140
Default

Great progress well done
__________________
My build diary is at http://thailoz.wordpress.com/
Reply With Quote
  #9  
Old 27th October 2014, 08:36 AM
K4KEV's Avatar
K4KEV K4KEV is offline
Senior Member
 
Join Date: Feb 2010
Location: WINGATE CO DURHAM
Posts: 1,511
Default

Nice one Rosco and welcome to the forum and yes that is pretty mean progress in a short space in time......on the road for next spring lol, looking forward to watching your build progress.
Reply With Quote
  #10  
Old 27th October 2014, 11:48 AM
dubzter's Avatar
dubzter dubzter is offline
Senior Member
 
Join Date: Jul 2013
Location: North of Scotland
Posts: 117
Default

great progress in such a short time, nice to see a scratch build as well.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 03:20 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.