eSteve's build pictures...

[eSteve]

This car building lark is easy... Look I'm almost done.

Just having a flight of fancy whilest finishing welding up the chassis!

And before anyone asks... Yes, we did sit in it and go "broom brooms"

[SeriesLandy]

Looking good, I like the colour

[will_08]

Lol i like it

[deezee]

Looks breezy. I'd invest in some warm pants.

[shh120m]

That's the lightest chassis Ive ever seen lol. I like the colour choice

[John.W]

Looks good but I think the tracking is out or there is a nut loose?

Good luck

[eSteve]

Thanks for the comments.

With respect to the colour, my plan is to have all the GRP in blue (ultramarine blue RAL 5002, thanks Saturn) the rest of the body work (i.e that I can make my self) will be brushed ally.

I'm planning on having the chassis and suspension grey/silver (see Janne's build).

Everything else will be either; black, white, silver, grey or chrome.

That's the plan anyway.

It should look like something along the lines of the first picture below, however, it might looked better with the bonnet blue see second picture below.

But there are many more things to worry about yet apart from the bonnet colour! Back to the welding.

[Bonzo]

Pleased to read that you have made some progress with your build Steve

Absolutely loved the first picture, did think the roll bar was a tad low though

Looking at other peoples build progress really helps to spur me on, that's for sure

[SeriesLandy]

Personally I like the grp bonnet but ive got a full kit. ral 5005 with black wings and aero screen.

If you are going grp bonnet buy and test fit before you fit the scuttle as mine was in the wrong place (even though I had the bonnet).

[eSteve]

SeriesLandy, thanks for the advice I'll bear it in mind.

Now some real pics...

Got my donor last year £200 off eBay with 2 wks MOT and 2 months tax.

See first picture.

Drove it down from Burton-on-Trent after sorting out a day's worth of insurance (~£15).

Now it's gone (just this evening), see second picture. Spent parts of the last 3 or 4 weekends stripping it. Goodness knows how it ever got its last MOT, many of the suspension bushes were severely perished and in fact the rubber was almost crumbly. Two feet of the driver's side sill was rusted through! Surprisingly all the fasteners came un-done without too much struggle, although a two-foot breaker bar helped.

To get the shell taken away I phoned around a few scrap metal / car breakers. Most of them didn't want to know 'cause I wouldn’t sign the V5 over to them (i.e. scrap it) and 'cos it didn't have any ID, I'd removed the chassis no. and the VIN plate. I remove the VIN plates of the bonnet slam panel by cutting out the full length of the slam panel as this made it easier to get the engine and g'box out.

Eventually found a smaller operator in the scrap metal business (although still a licensed waste carrier) who winched it on to the back of his flat bed just a few minutes ago.

Although I have a long, long way to go yet, having the parts from the donor on my bench and the donor its self gone feels good.