Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > Donor cars
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #11  
Old 24th July 2012, 10:59 PM
chrisponter chrisponter is offline
Member
 
Join Date: Jul 2011
Location: Romford, Essex
Posts: 62
Default

Quote:
Originally Posted by vmax1974 View Post
Got the rear subframe dropped down to the floor today but the front subframe has got caught up on the threads

As far as I can tell all the groundwork to removing the subframe has been done

Have I missed anything why even bashing the subframe with a length of wood and a sledge hammer it just wont budge
The front is bolted on in 4 places I think, once on each side inline with the wishbones, then some more further back and in towards the middle of the car.

I did the back ones first, then held it up with a jack while I undid the fronts.

Can't remember if that rear bit uses 3 or 2 bolts though.



Does that help?
Reply With Quote
  #12  
Old 24th July 2012, 11:05 PM
vmax1974's Avatar
vmax1974 vmax1974 is offline
Senior Member
 
Join Date: Apr 2011
Location: Teesside
Posts: 1,141
Default

Quote:
Originally Posted by PorkChop View Post
Have you undone the 2 14mm bolts right at the rear of the subframe? There's 8 bolts to undo IIRC in total including the 4 around the strut tops.
Yes got the 2 rear most ones and 2 each side at the top of the subframe behind the strut that makes 6 where is the other 2
Reply With Quote
  #13  
Old 24th July 2012, 11:12 PM
alga's Avatar
alga alga is offline
Senior Member
 
Join Date: Feb 2009
Location: Vilnius, Lithuania
Posts: 1,249
Default

Quote:
Originally Posted by chrisponter View Post
+1 on Johno's point about Keith Tanners book How to Build a Cheap Sports Car, it's just about how he managed to overcome all the problems in his build.
His build log was my inspiration to start my own build! Sadly, the book is out of print and unavailable on the online booksellers for a reasonable price.
__________________
Albert
Haynes Roadster FAQ | Haynes Builder Locations
Gallery, build thread in Lithuanian / via Google Translate.
Reply With Quote
  #14  
Old 24th July 2012, 11:14 PM
PorkChop PorkChop is offline
Senior Member
 
Join Date: Jul 2011
Posts: 394
Default

Have you undone the damper mountings? There's 2 bolts on each side. You won't be able to separate the shell from the subframe if you don't undo these.
Reply With Quote
  #15  
Old 24th July 2012, 11:21 PM
vmax1974's Avatar
vmax1974 vmax1974 is offline
Senior Member
 
Join Date: Apr 2011
Location: Teesside
Posts: 1,141
Default

Quote:
Originally Posted by PorkChop View Post
Have you undone the damper mountings? There's 2 bolts on each side. You won't be able to separate the shell from the subframe if you don't undo these.
Yeah got them too spent most of the last 4 hours head scratching and double checking next step is going to be the gas axe I think
Reply With Quote
  #16  
Old 10th September 2012, 10:27 PM
PorkChop PorkChop is offline
Senior Member
 
Join Date: Jul 2011
Posts: 394
Default

Quote:
Originally Posted by vmax1974 View Post
Yeah got them too spent most of the last 4 hours head scratching and double checking next step is going to be the gas axe I think
I know it's a bit late now, but it might help someone else - the bolts you mean are a bit hidden.

If you look at the front lower wishbone from the side of the car, you'll see an indentation in the bodyshell just slightly further back from the rearmost wishbone mounting. That's where the bolt is hidden, one on each side of the car.

These 2 bolts should be immediately obvious if you have either a pit or a lift.
Reply With Quote
  #17  
Old 12th September 2012, 12:02 AM
shh120m's Avatar
shh120m shh120m is offline
Senior Member
 
Join Date: Sep 2010
Location: thirsk
Posts: 557
Default

Solution to steering rack clearance issue. Turned alluminium tapered insert fitted into control arm on upright reamed to take standard ford rs2000 track rod ends from the top as opposed to underneath. Picture taken without rack in place but gives an idea how much clearance there is now. Its yet to be seen if there is any significant change to the amount of bump steer as the instant centre position is changed from the original setup, but either way its safer than having contact between rack and wishbone. I did toy with the idea of changing the upper wishbone to induce some negative castor, both to help lift the control arms and help with self centering, but it would be no consellation to those who have already made their wishbones so i think this is the best solution, although iirc talon was talking about using the bent bmw track rod ends- thats another solution well worth playing with, i dont know if hes tried it might be worth a mention.

David bolam was asking about wingstays, if you make them like mine, just be sure to make sure the return angle at the bottom clears the wishbone plates at full hight of travel otherwise if there is any interference it could cause an accident whilst flying over the brow of a hill not being able to steer, probably best to use the dust cover holes as mounting points as suggested, something i never thought of duh




__________________
A few build photos... www.photobucket.com/ntsengineering

Last edited by shh120m : 12th September 2012 at 12:13 AM.
Reply With Quote
  #18  
Old 2nd October 2012, 02:36 PM
garylomas garylomas is offline
Junior Member
 
Join Date: Oct 2012
Location: near Taunton
Posts: 4
Smile Mx5 Based Choice

Hi,Im joining you guys ,just bought an MX5 based chassis off a guy on e bay that was never started and came complete with all running gear,1800cc
need to start looking at the brackets necessarry for the sterrring column ,pedals etc
I think its a better choice than a sierra based model nowadays
cheers
Gary
Reply With Quote
  #19  
Old 2nd October 2012, 08:34 PM
Johno's Avatar
Johno Johno is offline
Senior Member
 
Join Date: Sep 2011
Location: Lutton (East Anglia)
Posts: 497
Default

Quote:
Originally Posted by garylomas View Post
Hi,Im joining you guys ,just bought an MX5 based chassis off a guy on e bay that was never started and came complete with all running gear,1800cc
need to start looking at the brackets necessarry for the sterrring column ,pedals etc
I think its a better choice than a sierra based model nowadays
cheers
Gary
Hi Gary welcome aboard....
Plenty of people on here more than welcome to help you out..
So don't hesitate to ask.....
__________________
Any intelligent fool can make things bigger and more complex... It takes a touch of genius - and a lot of courage to move in the opposite direction.
Albert Einstein

http://s1199.photobucket.com/albums/aa472/JohnoSS1/

Johno
Reply With Quote
  #20  
Old 2nd October 2012, 10:40 PM
PorkChop PorkChop is offline
Senior Member
 
Join Date: Jul 2011
Posts: 394
Default

Quote:
Originally Posted by garylomas View Post
Hi,Im joining you guys ,just bought an MX5 based chassis off a guy on e bay that was never started and came complete with all running gear,1800cc
need to start looking at the brackets necessarry for the sterrring column ,pedals etc
I think its a better choice than a sierra based model nowadays
cheers
Gary
Welcome Gary

Was this the chassis you bought? http://www.ebay.co.uk/itm/290779639242
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 02:47 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.