#21
|
|||
|
|||
I'm trying to figure out your system. I take it the water is pushed through the heads/block by the water pump to the water rail at the back and then down the pipe in the centre back to the rad. I see the pipe is connected to the pump but I assume this is straight through the pump body to the rad.
Correct me please if I'm being thick but I notice on my tintops (both Zetecs) that the hose coming off the thermostat goes to the top hose on the rad and the pump is fed from the bottom hose. Yours appears to be the other way round.
__________________
Total cost so far Materials £3,150 Tools £855 |
Thread Tools | |
Display Modes | |
|
|