i have to save for a wedding so my project will have to end

[Andy_B]

Wishbones paid for PM sent

[greasemonkey]

thanks andy,

i will post them on monday

[JHewitt]

you have a PM

[JHewitt]

Originally Posted by rapidtornado

Sorry Joe, didn't read your post... you were obviously first dibs on the shocks...

No worries Rapid, KenK, beat us both to it, so my search for cheap shocks goes on

[greasemonkey]

i will be selling,

1 armoto cnc'd wooden wishbone jig for making your front and rear wishbones, unused so not burnt £15
2.0 zetec silver top engine f rom a 1997 mondeo £100 (bare)
1.8 cvh engine bare (stamped 1991) from f reg sierra (req cambelt & tensioner) £100
7.5" diff from a 1991 sierra with bolt on type shafts £60(used)
7" diff from f reg sierra 1.8 push in type shafts £60 (used)
mk2 escort standard steering rack (recon) £50
1 pair of modified uprights (new) £80
1 set of gsxr 600 srad carbs £40(without trumpets & flanges )
1 pair of front vented type brake calliper's (new ap locheed) and discs for sierra 1.8 f reg (new/stored ap locheed) £100
1 steering columbs with steering wheels from sierra £50 (not height adjustable)
full sierra wiring loom with fuse box coil & esc2 module £30
1 pair of push in used half shafts( f reg 1.8 cvh 7" type) £40
1 pair of bolt on used halfshafts (j sierra 2.0 dohc 7.5" type)£40
1 unfinnished chassis with all the plates and diff brackets,and u brackets (some welded some tacked on) £200
1 willans race harness with groin straps etc fia approved (out of date for racing use) £50
1 propshaft (mt75 type) £25
1 front suspension jig from saturn sc £50
1 f reg sierra servo with master cylinder fluid resevoir and top with switch £25
1 f reg sierra rear brake valve £5
sierra coolant bottle £10
cvh inlet manifold with carb £20
cvh exhaust manifold £10
rear backplates with brakes,drums,hubs
few other bits and bobs just ask
rear brake calliper mounting brackets
mondeo coolant bottle
starter motor cvh type (used)
alternator cvh type (used)
sierra heater motor

[sirtommy]

Cheers mate. Hope your wedding goes well if anyone else is looking to buy stuff i would recommend buying it off greasemonkey

[greasemonkey]

thanks tom ,good look with your build mate

[greasemonkey]

all parts have now been sold