#1
|
|||
|
|||
Pedal Bush Redesign
Hi
I am currently building my pedal box and have a bit of spare time and a new (to me) lathe to play with. Im thinking of producing a 2 piece top hat bushing instead of the straight through design in the book. Im thinking I will probably reduce the steel tube length by about 6mm and have a 3mm flange on each end of the bushing with the same outer diameter as the tube. Any thoughts on this? i know its probably overkill but like i said i have the time and a lathe waiting to be used. I was also looking at the oilite bushings but have told not to bother using them when using a threaded pivot. Cheers Andy Last edited by andysredmini : 13th June 2011 at 01:46 PM. |
#2
|
||||
|
||||
Andy,
I changed the design of mine slightly. I used a nylon insert with a stainless steel crush tube. Very similar to the wishbone idea. Works a treat and the pedals operate really smoothly now. Cheers Dave
__________________
http://s831.photobucket.com/user/dav...ter%20Pictures OTR 01/05/14 - 1.6 CVH, Type 9, Bike Carbs, Megajolt |
#3
|
|||
|
|||
It's how 3GE always did it, if your going to do it do it right
TK
__________________
Innovation not Imitation!
|
#4
|
|||
|
|||
3GE ones were excellent quality and value.
__________________
Cost : Little as possible. Thanks : To those who by their generosity my build has progressed. Its a handmade sports car not a flaming kit car !!! If at first you dont succeed,avoid skydiving... No parachute require to freefall,only if you want to do it twice. |
#5
|
|||
|
|||
Did you do them like a top hat or straight through with a crush tube?
Andy |
#6
|
|||
|
|||
oh yea top hats are the way
bought an 18 inch piece of acetal off the bayŁ7 and TJ turned them down on our lathe ....simples oh and we didn,t shorten the tubes we just moved each support out by 3 mm wanted to keep the tube lenght for balance and increased bearing area cheers les g. we did post pictures for them on here |
#7
|
|||
|
|||
acetal delrin all the same
the post and pictures were in general discussion titled todays job was pedal bushes and clevis,s HTH cheers les g |
#8
|
||||
|
||||
I just went straight through with mine.
__________________
http://s831.photobucket.com/user/dav...ter%20Pictures OTR 01/05/14 - 1.6 CVH, Type 9, Bike Carbs, Megajolt |
#9
|
|||
|
|||
If someone had far too much time what would be the perfect money no object method of pivoting the pedals?
Would it involve roller bearings? |
#10
|
|||
|
|||
Acetal etc shrinks after machining/drilling....spooky stuff and will annoy confuse the hell out of you...
|
Thread Tools | |
Display Modes | |
|
|