|
#1
|
|||
|
|||
Max sump under car.
Cant find any reference anywhere as to the most sump/bellhousing that can be below the floorpan when installed before something takes a lump out of it?
Bob Last edited by robo : 23rd June 2011 at 05:34 PM. |
#2
|
|||
|
|||
Instant sump reduction
That may depend on the height of the object you hit
I'd say anything below floorpan level is a likely target |
#3
|
|||
|
|||
3" clearance under the sump would be a good figure to aim for. ( If the ideal height under the rail is 5").
Make sure that at full down suspension travel there is still air under the sump!! Last edited by 7ishNZ : 24th June 2011 at 08:18 AM. |
#4
|
|||
|
|||
There is no point in cutting the sump shorter than the bellhousing.
Then it's about how high the rocker cover is to the bonnet. |
#5
|
|||
|
|||
But how much?
Have tried to get the answer to this a couple of times, I am about to take engine and box to talon for chassis mock up and need to know what can stick out under the car before it becomes a problem. The answer will determine overall chassis height as that can changed . Is 2" sorry 50mm to the young ones to much?
Bob |
#6
|
|||
|
|||
2" would be OK.
|
Thread Tools | |
Display Modes | |
|
|