|
|
#1
6th January 2013, 04:25 PM
|
|||
|
|||
Locating a wire
Hi,
I'm having trouble finding a feed for my dip beam from the light switch, i've a grey for the side lights, the book says brown/black but i can't seem to get any power of this wire no matter what i do with the key or switch position. Any ideas would be appreciated. Terry
__________________
If you need a friend, call me, if u need company call me, if you need help call me, if u need money this number is no longer available. 
|
|
#2
6th January 2013, 09:56 PM
|
||||
|
||||
|
Probably that wire provides ground for a relay with a permanent live on the other side of the winding.
__________________
Albert Haynes Roadster FAQ | Haynes Builder Locations Gallery, build thread in Lithuanian / via Google Translate.
|
|
#3
7th January 2013, 10:38 AM
|
||||
|
||||
|
What year of loom is it.
TT
__________________
You only get a woosh with a dump valve Build Thread Man Cave Mantiques Cecil Street Auto Repairs Garage Carlisle Build Cost £4181.65 - Last - Wheel Cylinders
|
|
#5
9th January 2013, 06:09 PM
|
|||
|
|||
|
Iirc you won't find a live at the Sierra switch because the switch is used to earth the circuit. The dip relay is with fed with a live from the fuse box and the switch earth the other side of the relay to complete the circuit. I think the side lights are the other way round ie the switch is fed with a live from the fuse box then through the switch to the lights.
__________________
Total cost so far Materials £3,150 Tools £855
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
